|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
08-06-2020, 09:41 PM | #1 |
Not Yet Wild
Join Date: Aug 2020
Location: Yacolt, WA
Posts: 3
|
DS OBC bypass or removal "sticky"?
Hi, I have used this site several times before but finally registered,
so hi everybody. my golf cart is for fun around the property and saves me a lot of walking back and forth to my shop. I have a 2000 48v DS that I just bought a RoyPow lithium pack for and I want to remove the OBC completely. I bought the pack from Elite golf carts in California and was told I needed to do a bypass of the OBC as the battery pack comes with it's own charger. they told me to look on you tube because it was easier than trying to explain it, but nobody has done one for a computer like mine. I looked and found a sticky here for the 6 wire plug but can't find anything for version 1 OBC #21065, its a 3 wire triangle shaped plug with red yellow and brown wires and the brown turns to black on the other side of the plug, and looks to go to the solenoid. so if I do a 10 gauge wire from charge plug term and go to B-, what do I do with the other 3 wires? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-06-2020, 10:17 PM | #2 |
Gone Wild
Join Date: Apr 2020
Location: 1000 Oaks, SOCAL
Posts: 424
|
Re: DS OBC bypass or removal "sticky"?
Checkout the follow-up thread "How-To OBC Bypass the Easy Way".
https://www.buggiesgonewild.com/show...ght=OBC+bypass Maybe this post can be moved to that thread. I did an OBC delete, removing most of the wires cleaned things up a bit. |
08-06-2020, 11:28 PM | #3 |
Not Yet Wild
Join Date: Aug 2020
Location: Yacolt, WA
Posts: 3
|
Re: DS OBC bypass or removal "sticky"?
thank you, that makes it easy, just what I was looking for
|
08-27-2020, 03:02 PM | #4 |
Not Yet Wild
Join Date: Aug 2020
Location: Yacolt, WA
Posts: 3
|
Re: DS OBC bypass or removal "sticky"?
this is what I did for the removal of my OBC,
hope the picture works cut and spliced the 10 gauge black wires together, and landed the yellow wire in triangle plug to the same B- term that the 10 gauge black wire was already on. removed the red and brown wires from plug to clean it up and to leave the plug if I ever went back to lead acid. https://imgur.com/a/LVFmNbV |
|
|
Similar Threads | ||||
Thread | Forum | |||
Updating "sticky" clutch side seal | Gas Yamaha | |||
"Low to the ground Golf Carts!" Album sticky... | On Road Golf Carts! | |||
Clarification on part of "Sticky" above | Electric Club Car | |||
EZGO Differential "Sticky" | Electric EZGO |