|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
03-19-2021, 05:48 PM | #1 |
Not Yet Wild
Join Date: Aug 2016
Posts: 29
|
PDS FnR switch question
I am converting my DCS FnR level to a dash mounted PDS switch. I bought an EZGO switch that I thought was correct but just wanted to double check if the PDS switch is JUST F or R or is there a "dead" or "neutral" spot in the middle. Seems like it would be one or the other but just wanted to double check before I I got it mounted.
Thanks ! |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-19-2021, 06:14 PM | #2 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: PDS FnR switch question
The PDS direction selector switch is the On-Off-On type, or Foward-Neutral-Reverse.
If you are installing an actual PDS switch, it is SPDT/center-OFF, so you'll have to add a diode to get reverse to work. In a DCS the two switches are "Run" and "Reverse". For F only Run is closed and for R both Run and Reverse are closed. |
03-19-2021, 06:19 PM | #3 | |
Not Yet Wild
Join Date: Aug 2016
Posts: 29
|
Re: PDS FnR switch question
Quote:
Thanks for the help ! |
|
03-19-2021, 07:13 PM | #4 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: PDS FnR switch question
Yep. A 3A diode is more than adequate.
Glad to hear you've got it working. |
|
|
Similar Threads | ||||
Thread | Forum | |||
F&R Switch Question | Electric EZGO | |||
Key switch question | Electric Club Car | |||
key switch question | Gas Yamaha | |||
F&R switch 93 CC 36v question | Electric Club Car | |||
Key switch & Kill switch question | Gas Club Car |