|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
07-28-2021, 06:46 AM | #21 | |
Gone Wild
Join Date: Jul 2015
Location: Central South Carolina
Posts: 939
|
Re: 2013 EZGO RXV No Go
Quote:
|
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-28-2021, 07:06 AM | #22 |
Gone Wild
Join Date: Sep 2020
Location: Germany
Posts: 1,999
|
Re: 2013 EZGO RXV No Go
The 2008 - 2014 model have a bearing encoder ( bearing/speed sensor combination ), unfortunately around 200$...
|
07-28-2021, 07:14 AM | #23 |
Gone Wild
Join Date: Mar 2016
Posts: 265
|
Re: 2013 EZGO RXV No Go
|
07-28-2021, 07:16 AM | #24 |
Gone Wild
Join Date: Mar 2014
Location: NE Indiana & SW Florida
Posts: 3,238
|
Re: 2013 EZGO RXV No Go
That 2013 will have a motor speed sensor not a bearing encoder.
|
07-28-2021, 07:55 AM | #25 |
Gone Wild
Join Date: Jul 2015
Location: Central South Carolina
Posts: 939
|
Re: 2013 EZGO RXV No Go
|
07-28-2021, 07:56 AM | #26 |
Gone Wild
Join Date: Jul 2015
Location: Central South Carolina
Posts: 939
|
Re: 2013 EZGO RXV No Go
|
07-28-2021, 08:17 AM | #27 |
Gone Wild
Join Date: Sep 2020
Location: Germany
Posts: 1,999
|
Re: 2013 EZGO RXV No Go
Sorry guys, i've checked on shop.txt and there is the bearing encoder mentioned 2008 - 2014. Hopefully there is nothing wrong with my eyes:)
Bearing Encoder Service Kit TXT Product Group EZGO Asset Part Number RXV_G01 Make RXV Type Electric 48 V Model RXV Standard, RXV with Lights, RXV with Lights and Rear Seat Year 2008, 2009, 2010, 2011, 2012, 2013, 2014 Shipping Family General |
07-28-2021, 09:28 AM | #28 |
Gone Wild
Join Date: Mar 2016
Posts: 265
|
2013 EZGO RXV No Go
Prepare to hear simple words. I don’t know all the names of these parts.
Got the motor apart. Cleaned the inside and outside walls. End bearing is quiet and smooth. Though if I push left to right on the center piece, there is a little bit of play on the end. Not much, but probably enough to cause a wobble on the other end causing the internals to touch the side walls. Thinking about replacing that bearing if I can find it just because. Center piece. Knocked off the surface “rust” with a steel brush. Did the same to the inside walls. Sent from my iPhone using Tapatalk |
07-28-2021, 09:31 AM | #29 |
Gone Wild
Join Date: Mar 2016
Posts: 265
|
Re: 2013 EZGO RXV No Go
This motor has been taken off before or at least attempted. It was only being held on by 3 bolts, not 6. The other 3 bolts were sheared off. Gotta find a way to extract them. Tried drilling pilot holes but I must have the wring type of drill bit as I’m not getting very deep.
Hard to find time to work when you have a golf cart to fix. Sent from my iPhone using Tapatalk |
07-28-2021, 10:36 AM | #30 | |
Gone Wild
Join Date: Jul 2015
Location: Central South Carolina
Posts: 939
|
Re: 2013 EZGO RXV No Go
Quote:
|
|
|
|
Similar Threads | ||||
Thread | Forum | |||
2013 Ezgo RXV | Lifted Golf Carts | |||
2013 EZGO RXV 48v - Can I go to 60v? | Electric EZGO | |||
2013 club car Precedent vs 2013 EZGO RXV | Electric Club Car | |||
16 mph 48V 2013 EZGO TXT? | Electric EZGO | |||
2013 ezgo | Electric EZGO |