|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
09-12-2021, 08:33 AM | #1 |
Gone Wild
Join Date: Jan 2011
Location: Florence,SC
Posts: 238
|
Alltrax FN KEY programming
Is there a trick to programming this personality switch? Mine is only running on what I program in the Normal position. Gotta be something really easy or box is defective coming from alltrax.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-12-2021, 10:10 AM | #2 |
Gone Wild
Join Date: Jan 2011
Location: Florence,SC
Posts: 238
|
Re: Alltrax FN KEY programming
So, I definitely have something going on with brand new switch. Fine quality assurance program that comes along with a freaking $119 piece of plastic. 2 outside pins of the 3 pin connector weren't even seated. Fixed that problem but now it selects normal-user1-normal instead of the original problem of normal-normal-normal.
|
09-12-2021, 01:05 PM | #3 |
Gone Wild
Join Date: Jan 2011
Location: Florence,SC
Posts: 238
|
Re: Alltrax FN KEY programming
Ok, the 2nd problem may or may not have been on me. -->RTFM<-- It was imperative to remove the green/white wire from pin 4 on the 16 pin plug even though the factory service manual said it wasn't being used. Lesson learned and now I can get on with programming the users.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Alltrax SR Programming | Electric Club Car | |||
Alltrax XCT Programming | Electric Club Car | |||
xct 500 alltrax programming how to | Electric Yamaha | |||
Alltrax programming | Electric EZGO | |||
alltrax programming | Electric EZGO |