|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
10-30-2021, 05:07 PM | #1 |
Gone Wild
Join Date: Jan 2020
Location: miami fl
Posts: 166
|
1987 solenoid to solid state alltrax, need help!
Hey guys I almost have everything wired up, but I'm down to mounting the pb6 now. I read everywhere to get full range, but this just seems impossible.
If I mount it to far then it doesn't engage I guess the little.micro switch, but if I make sure the switch is being engaged and disengaged, it doesn't go full range of travel. Does anyone have any photos or what I should do at this point? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-31-2021, 05:21 AM | #2 |
Not Yet Wild
Join Date: Nov 2018
Posts: 6
|
Re: 1987 solenoid to solid state alltrax, need help!
Following..
I am at the same step in my rebuild. Trying to figure out where to mount and fabricate something for the pb8 |
10-31-2021, 08:28 AM | #3 |
Gone Wild
Join Date: Jan 2020
Location: miami fl
Posts: 166
|
Re: 1987 solenoid to solid state alltrax, need help!
I have everything run cables and all.and literally makes no sense. All the instructions show it has to be at full range of motion, but I already just simulated a mount and he's already as far forward as it can go.
I would say at full press it's like 80 percent of the way, but im wondering if that's good enough. I'm at a stand still now bc I broke the uni ball on the rod from messing around with it. |
11-01-2021, 10:18 AM | #4 |
Gone Wild
Join Date: Jan 2020
Location: miami fl
Posts: 166
|
Re: 1987 solenoid to solid state alltrax, need help!
Hey Mcnasty, so finally got in touch with revolution, guy has been amazing, but unfortunately its not a crazy person like me working 24/7 lol. Basically the alltrax unit is self learning, so itll adjust when your at 80 percent throttle per say, and itll figure out thats max and at 100 percent. So lol lets mount these throttles up lol and get back on the road.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Solid State Conversion blew the diode on the solenoid | Electric EZGO | |||
36V FNR switch for solid state | Electric Club Car | |||
1988 EZGo solenoid replacement part number? (resistor speed control, not solid state) | Electric EZGO | |||
36v CC to 48V solid state | Electric Club Car | |||
What does solid state mean | Electric Club Car |