|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
02-16-2022, 01:52 PM | #1 |
Not Yet Wild
Join Date: Jan 2021
Location: texas
Posts: 22
|
2003 txt pds
i am rewiring a 2003 txt pds. there was not a resistor wire going across the solenoid. does it need one. thanks
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-16-2022, 02:04 PM | #2 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: 2003 txt pds
Should be a 250Ω - 10W resistor between the big terminals and it doesn't hurt to have a 3A-1000V diode between the small terminals (banded end connected to small terminal with yellow wire on it).
|
02-16-2022, 06:24 PM | #3 |
Not Yet Wild
Join Date: Jan 2021
Location: texas
Posts: 22
|
Re: 2003 txt pds
ok thanks
|
|
|
Similar Threads | ||||
Thread | Forum | |||
48v to 72v CC 2003 DS | Electric Club Car | |||
is this a 2003 or 2003.5 club car | Electric Club Car | |||
Ez-go txt 2003 | Golf Carts and Parts | |||
2003.0 or 2003.5 Club Car DS Lift ?'s | Lifted Golf Carts | |||
2003 ez-go pds | Electric EZGO |