Dash teaser

Winston Ellis · 03-30-2022, 08:29 PM

Got it printed , dry fitted and wired up. I have it running of a 12v ps right now.

Sent from my iPhone using Tapatalk

simicrintz · 03-31-2022, 07:38 AM

Looks awesome!!

Winston Ellis · 03-31-2022, 07:50 PM

Thanks! Got the radio fitted also! Have a clearance issue with the cupholder hitting the gps. Doh! Maybe a smaller cupholder or just an access panel is an option

Sent from my iPhone using Tapatalk

hojolabo · 04-01-2022, 10:00 AM

How about a shallow cup to hold ? or whatever besides a typical cup/drink holder

Sent from my SM-T387V using Tapatalk

Winston Ellis · 04-01-2022, 05:52 PM

I think I’m going to cut this one and notch it, make a sleeve so it’s still usable.

Sent from my iPhone using Tapatalk

simicrintz · 04-02-2022, 09:27 AM

Same dash here; I had to cut the bottom out and reposition it to clear some electronics. I also sealed up the drain holes so that nothing drips down on anything sensitive.

That really looks nice

Winston Ellis · 04-03-2022, 07:08 AM

Quote:

Originally Posted by simicrintz

Same dash here; I had to cut the bottom out and reposition it to clear some electronics. I also sealed up the drain holes so that nothing drips down on anything sensitive.

That really looks nice

Thanks man. So you have the same issue with the cupholders? How did you “shorten” your cupholder? Good idea on sealing up the holes!

Sent from my iPhone using Tapatalk

kgsc · 04-03-2022, 07:15 AM

Maybe a dumb question but could you flip it 180 and put the gps at the other end?

Winston Ellis · 04-03-2022, 07:47 AM

I could but the issue would then be the GPS being too close to the steering shaft for me to see. The voltage and amperage meters are also different cut out, but yes I could flip it. I would probably be better off printing a new one because the ignition key is “keyed”. The flat spot is on the top. I really like the layout and I think I’m just going to cut that cupholder.

Sent from my iPhone using Tapatalk

simicrintz · 04-03-2022, 09:14 AM

Quote:

Originally Posted by Winston Ellis

Thanks man. So you have the same issue with the cupholders? How did you “shorten” your cupholder? Good idea on sealing up the holes!

I cut the bottom of the cup holder off with my Dremel and then chemically welded it up high enough to clear what was in the way (cannot remember what I used to weld-PVC or ABS glue maybe). It's a short holder now but I can still hold something in it and have three others for the important stuff!

03-30-2022, 08:29 PM	#1
Winston Ellis Gone Wild Join Date: Oct 2018 Posts: 595	Dash teaser Got it printed , dry fitted and wired up. I have it running of a 12v ps right now. Sent from my iPhone using Tapatalk
Winston Ellis Gone Wild Join Date: Oct 2018 Posts: 595

03-31-2022, 07:38 AM	#2
simicrintz Gone Wild Join Date: Apr 2020 Location: Hurricane, Utah Posts: 2,789	Re: Dash teaser Looks awesome!!

03-31-2022, 07:50 PM	#3
Winston Ellis Gone Wild Join Date: Oct 2018 Posts: 595	Re: Dash teaser Thanks! Got the radio fitted also! Have a clearance issue with the cupholder hitting the gps. Doh! Maybe a smaller cupholder or just an access panel is an option Sent from my iPhone using Tapatalk
Winston Ellis Gone Wild Join Date: Oct 2018 Posts: 595

04-01-2022, 10:00 AM	#4
hojolabo Not Yet Wild Join Date: Jul 2019 Posts: 61	Re: Dash teaser How about a shallow cup to hold ? or whatever besides a typical cup/drink holder Sent from my SM-T387V using Tapatalk
hojolabo Not Yet Wild Join Date: Jul 2019 Posts: 61

04-01-2022, 05:52 PM	#5
Winston Ellis Gone Wild Join Date: Oct 2018 Posts: 595	Re: Dash teaser I think I’m going to cut this one and notch it, make a sleeve so it’s still usable. Sent from my iPhone using Tapatalk
Winston Ellis Gone Wild Join Date: Oct 2018 Posts: 595

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

04-02-2022, 09:27 AM	#6
simicrintz Gone Wild Join Date: Apr 2020 Location: Hurricane, Utah Posts: 2,789	Re: Dash teaser Same dash here; I had to cut the bottom out and reposition it to clear some electronics. I also sealed up the drain holes so that nothing drips down on anything sensitive. That really looks nice

04-03-2022, 07:15 AM	#8
kgsc Gone Wild Join Date: Dec 2009 Location: Aiken, SC Posts: 13,141	Re: Dash teaser Maybe a dumb question but could you flip it 180 and put the gps at the other end?

04-03-2022, 07:47 AM	#9
Winston Ellis Gone Wild Join Date: Oct 2018 Posts: 595	Re: Dash teaser I could but the issue would then be the GPS being too close to the steering shaft for me to see. The voltage and amperage meters are also different cut out, but yes I could flip it. I would probably be better off printing a new one because the ignition key is “keyed”. The flat spot is on the top. I really like the layout and I think I’m just going to cut that cupholder. Sent from my iPhone using Tapatalk
Winston Ellis Gone Wild Join Date: Oct 2018 Posts: 595

Similar Threads
Thread	Forum
Dash, dash trim and steering wheel	Electric Club Car
How do I get behind dash?	Electric EZGO
Club Car Dash - Lockable Dash Insert Doors for Sale	Golf Carts and Parts
Teaser wheel pic!!	Members Rides