|
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
04-19-2022, 04:14 PM | #1 |
Not Yet Wild
Join Date: Mar 2022
Posts: 18
|
G29 not moving solved
I just removed the motor and it looks like the brushes were seized and caused arcing on the commutator which put deep gouges in it and looks like it melted some of the bars together. Can this be repaired or should i just buy new upgraded motor?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-19-2022, 05:16 PM | #2 |
Gone Wild
Join Date: May 2012
Location: Rio Verde, Az
Posts: 7,183
|
Re: G29 not moving solved
That can be repaired by a motor shop that can turn it. I have seen worse than that. You might want to consider an upgraded motor though as the Hitachi motor isn't all that good to start with.
|
04-20-2022, 01:39 AM | #3 |
Not Yet Wild
Join Date: Mar 2022
Posts: 18
|
Re: G29 not moving solved
Yeah i think i will but if i get the motor i feel like i need the controller to go along with it. Ill probably go with d&d unless someone knows anyone cheaper. Any experience with navitas vs alltrax?
|
04-20-2022, 08:42 AM | #4 |
Gone Wild
Join Date: May 2012
Location: Rio Verde, Az
Posts: 7,183
|
Re: G29 not moving solved
Both of my G29's have D&D motor and Alltrax controller. Quality stuff.
|
04-20-2022, 09:57 AM | #5 |
maintaining a low profile
Join Date: Oct 2009
Location: SW Virginia USA
Posts: 6,314
|
Re: G29 not moving solved
Plowmans motors are engineered by D&D. My G22 came with a new 300a Alltrax controller, so I got the Riot Kit, minus the 500a controller--the cart flies with only 300a. All of Don's stuff is top notch...
|
04-22-2022, 06:06 PM | #6 |
Not Yet Wild
Join Date: Mar 2022
Posts: 18
|
Re: G29 not moving solved
Yeah i just got a used motor for this cart and with the 300 amp ge controller on it it goes quite a bit faster than the moric with speed code on my other cart. I can imagine a more powerful motor and controller. Told myself i didnt need it but now i want more torque. We live on top of a mountain with up and down property. Stock cart slows but still powers up the road. Ill probably go with d&d motor and alltrax controller when i sell one of the carts.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
VRX 460 rod knock solved | Clone Engine Swaps | |||
RXV no torque, solved?? | Electric EZGO | |||
G2 low speed solved | Gas Yamaha | |||
No-Go Sometimes Solved! | Electric EZGO | |||
Problem solved!!! | Electric Club Car |