ScottyB’s conversion kit - popping fuses

[scottyb]

Don't know why the pedal range would change. Did it get water in it?
You can go into the program and disable the high pedal disable on the throttle page and see if that resolves the problem .

[TheTick]

Aaaaand another one for the wall of “holy crap I’m an idiot”. I remembered last night that if I shifted too quickly (still at a stop but moving the FnR from one side to the other too quickly) that I’d get a similar behavior (but hadn’t checked the LED). So just for grins I put it in gear and then turned the key… MOTION!

Not 100% sure on the logic there, but at least my long weekend isn’t looking so sad and depressing anymore :)

Still though, anyone know why this occurs?

[TheTick]

Thanks Scotty - this one will never be shown rain or puddles :) I think though that I’m going to get the configuration software and add a personality switch to it so my wife can drive it without testing my insurance policy ;). Much later date!

Thanks again - love the kit, and totally loving the cart!

https://photos.app.goo.gl/ztmKL81bpYfCe9YP7

[scottyb]

Possible if you slap it from forward to reverse ( or vise versa) too rapidly the controller will never see the center neutral position. This may have caused the error.

[TheTick]

Originally Posted by scottyb

Possible if you slap it from forward to reverse ( or vise versa) too rapidly the controller will never see the center neutral position. This may have caused the error.

Thanks man! Have a great weekend!