|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
06-24-2022, 12:58 PM | #1 |
Not Yet Wild
Join Date: May 2022
Posts: 2
|
'05 EZGO PDS Brush Replacement
2005 EZGo PDS Cart. Trying to replace motor brushes. Took motor apart, however armature is still in tact with the cap. How do I clear brush studs as I have no room with armature installed? How do I remove armature from cap? I left speed sensor on end of cap hoping I won't have to remove as its tight. Please advise & thank you in advance.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-24-2022, 01:51 PM | #2 |
Not Yet Wild
Join Date: May 2022
Posts: 2
|
Re: '05 EZGO PDS Brush Replacement
Update: Manual says have fun and remove the speed sensor & magnet.. So here I go
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Starter/Generator brush replacement tips? | Gas Yamaha | |||
Help with brush replacement/brush and brush wiring placement | Electric EZGO | |||
Starter brush replacement | Gas Yamaha | |||
Starter Not Working? Brush Replacement | Gas Club Car | |||
brush replacement | Electric EZGO |