|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
07-15-2022, 03:02 PM
|
#11 |
|
Getting Wild
Join Date: May 2017
Posts: 94
|
Re: 1999 EZGO 36V no power
Please give me more info. I assume that I set my multimeter to DCV and put the red lead to the pin and the black lead to a ground?
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
07-15-2022, 03:12 PM
|
#12 |
|
Getting Wild
Join Date: May 2017
Posts: 94
|
Re: 1999 EZGO 36V no power
How do I get to pins 9 and 10? It is very crowded in there. Am I supposed to remove it from the mount? It seems the solenoid is in my way.
|
|
|
|
|
07-15-2022, 03:15 PM
|
#13 |
|
Getting Wild
Join Date: May 2017
Posts: 94
|
Re: 1999 EZGO 36V no power
I figured it out. I have 38.1V between pin 9 and the neg post of my battery and between pin 10 and the negative post of my battery
|
|
|
|
|
07-15-2022, 03:31 PM
|
#14 |
|
Getting Wild
Join Date: May 2017
Posts: 94
|
Re: 1999 EZGO 36V no power
Now that I am down in my golf cart, I see my green light on the controller flashing four times.
Only when I have it connected to my computer. |
|
|
|
|
07-15-2022, 03:35 PM
|
#15 |
|
Gone Wild
 Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,176
|
Re: 1999 EZGO 36V no power
You need to chase the power. With the key on and in forward there should be pack positive on the yellow wire on the small post of the solenoid. Also on the green wire on the ten pin connector when the pedal is pushed.
|
|
|
|
|
07-15-2022, 03:45 PM
|
#16 |
|
Getting Wild
Join Date: May 2017
Posts: 94
|
Re: 1999 EZGO 36V no power
I have no power (less than 0.5V) at either.
|
|
|
|
|
07-15-2022, 03:53 PM
|
#17 |
|
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,176
|
Re: 1999 EZGO 36V no power
Okay now you need to check the yellow wire at the fnr puck. If nothing check the wire on the other side of the micro switch. If it is live jumper across the switch and try again
|
|
|
|
|
07-15-2022, 04:07 PM
|
#18 |
|
Getting Wild
Join Date: May 2017
Posts: 94
|
Re: 1999 EZGO 36V no power
THANK YOU!
It looks like I broke one of the wires at the FNR puck when I was installing the batteries. When I touched the wires together it works. |
|
|
|
|
07-15-2022, 08:27 PM
|
#19 |
|
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,176
|
Re: 1999 EZGO 36V no power
Good deal. Glad you figured it out.
|
|
|
|
|
07-15-2022, 10:34 PM
|
#20 |
|
Getting Wild
Join Date: May 2017
Posts: 94
|
Re: 1999 EZGO 36V no power
I was able to push the wire back into the switch enough to see that I could make the solenoid click and the wheels spin, but there is not enough wire left to splice it back together.
Now I just have wait until my new switch assembly wire to come in for my permanent fix. |
|
|
|
|
| Tags |
| xct500 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 1999 gas ezgo loss of power | Gas EZGO | |||
| EZGO TXT 1999- no power to motor | Electric EZGO | |||
| 1999 EZgo TXT no power on hills | Electric EZGO | |||
| 1999 EZGO TXT no power to the motor | Electric EZGO | |||
| 1999 EZGO whines and lacks power | Electric EZGO | |||
Linear Mode
