|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
08-03-2022, 12:47 PM | #1 |
Vintage tech
Join Date: Sep 2009
Location: South
Posts: 3,216
|
Controller question
I am installing a EZGO Golf Cart 25864G09 Electronic Speed Controller on a 1995 series cart. My old one has the terminal for A2. The one I am installing doesn't have that. Only B- B+ and M- .
Where do I put that cable that was connected to A2 ? It goes from the A2 terminal to F/R switch now. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-03-2022, 01:01 PM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Controller question
Controller A2 was eliminated because it burned up a lot of controllers by dumping excessive motor amperage back into the control.
The 2 cables that were connected to controller A2 were from the F&R and the motor A2. When installing a 3 tab control simply run one cable from the motor A2 to the F&R. Some users simply bolt the 2 cables together and tape or otherwise isolate the connection from well, everything. |
08-03-2022, 01:05 PM | #3 | |
Vintage tech
Join Date: Sep 2009
Location: South
Posts: 3,216
|
Re: Controller question
Quote:
|
|
08-03-2022, 02:33 PM | #4 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Controller question
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Controller Question | Electric EZGO | |||
Controller question | Electric EZGO | |||
Controller Question | Electric Club Car | |||
PDS Controller Question | Electric EZGO | |||
Controller question | Lifted Golf Carts |