96 electric club car wiring

[cruzer409]

Hello
I have a 96 electric club car. I have been trying to find a wiring diagram that matches what i have. I am thinking it has been modified before i got ahold of it. It has the regen motor, toggle switch shifter, 1 solenoid, it does not have a run/tow switch, and has no resister coils. I have been unable to locate a diagram that is close to this set-up.
Thank you

[Fairtax4me]

It would be a regen 1, and may have a Black T shape controller that is mounted to the upper cross rail behind the seat.
Those were horribly unreliable and there was an update kit made that uses an adapter module to convert the wire harness to match the newer Regen 2 controller that was Silver, and would be mounted in a similar place if it was updated.
The update kit for those was similarly unreliable and was quickly phased out when the Regen 2 system came along in 98. Neither of these make good systems for doing any kind of upgrades, so most people ditch them in favor of the IQ system.

If you can get a model number or a pic of the controller we can help determine what it has.

[Tom47]

Like Fairtax said this is probably a regen1 cart. Here is a link to the wiring diagram on post #13.

As you can see, it should have 2 solenoids, one being for slow speed reverse. If you have only one solenoid, it has been modified in an unfriendly way.

https://buggiesgonewild.com/showthread.php?t=924&page=2

[cruzer409]

I am trying to get some photos on here but having no luck getting them to load