Ezgo wiring issues

[Jmj32988]

Hey guys new here and looking for some advice. I have a ezgo txt that I believe is around a 98, but can’t read the tag. It’s a 36v with the fnr switch by right leg. I’m looking for the proper way to wire the solenoid and the controller. All the diagrams I see are for a different style fnr switch but mine has the style with just the two micro switches on top. I really think the guy I got it from has the wiring backwards. This cart has the ncx300/pds controller with a white rogers w-r/rbm solenoid. Thanks

[Retodd]

That sounds like a DCS Cart. There’s a good thread above in the sticky section that may have what you need.

[kgsc]

This? Post #4 https://buggiesgonewild.com/showthread.php?t=927

[Jmj32988]

I did the test of all the controller wiring and the only one that didn’t checkout was number 10. No matter if the run/tow switch is on or off it always has b+ power. I can never hear solenoid click with pedal but when you push the pedal it does nothing and then all of a sudden the the motor will engage and jerk the wheels. I just can figure this thing out. Also the charger port seemed to be be messed up so I separated the r/w and white and hooked red white up to b+ before I did this the card wouldn’t do anything. Also the reverse alarm has a tab broken of, does this wire need to be hooked up or can I jump the two together?