|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
10-05-2022, 08:03 PM | #1 |
Not Yet Wild
Join Date: Oct 2019
Posts: 61
|
TXT Series to Shunt conversion
Have a txt series cart and just purchased the navitas 5k AC conversion kit. Obviously upgrading to 48v battery pack. I know I need the 48v txt wire harness to work with the navitas controller. Any recommendations on where to get that harness? What parts would I need for the forward/reverse switch and solenoid? Or anything else that I’m not thinking of? Thanks!!!
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-05-2022, 08:39 PM | #2 |
Born to be Wild
Join Date: Feb 2019
Location: Palm Harbor Florida
Posts: 2,729
|
Re: TXT Series to Shunt conversion
I bought mine from Country Cat which had the best price and availability. 625805 is the number you’re looking for. You will need to get a SPST switch, just basically an on/off switch and a 48 volt solenoid.
|
10-06-2022, 07:42 AM | #3 | |
Gone Wild
Join Date: Mar 2020
Location: Tampa Bay
Posts: 248
|
Re: TXT Series to Shunt conversion
Quote:
You also need to get a gear selector. You can put it on the rear body or on the dash. I put mine on the dash and got a plate from Amazon. |
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Can I use a shunt motor in place of a series? | Electric EZGO | |||
Can a sepex controller run PM, series, shunt, alternator motors? | Extreme DC! | |||
Why did they go from Series to shunt motors | Electric EZGO | |||
Converting Shunt to Series | Electric Club Car | |||
EZ-go Marathon series or shunt wound motor? | Electric EZGO |