|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
03-26-2014, 06:25 AM
|
#21 |
|
Gone Mad
 Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: Disk Brakes
The Service Manual tells the specs for when they need to be replaced.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
03-26-2014, 08:40 PM
|
#22 |
|
Not Yet Wild
Join Date: Mar 2014
Location: Redondo Beach
Posts: 22
|
Re: Disk Brakes
Thx for responding. I will send more pics when I get home.
|
|
|
|
|
04-17-2014, 06:57 PM
|
#23 |
|
Not Yet Wild
Join Date: Mar 2014
Location: Redondo Beach
Posts: 22
|
Re: Disk Brakes
Can somebody please let me know if these 2 bolts on my rear Ausco disc brakes are to be tightened all the way or are the supposed to move a litte.
|
|
|
|
|
04-18-2014, 08:27 PM
|
#24 |
|
Gone Wild
Join Date: Dec 2011
Location: Jacksonville Beach, FL
Posts: 606
|
The link kernal added will give you all the info you need. No adjustments are made on the brakes themselves. The inst. State when the pedal is fully depressed there needs to be 1/4" cable still showing. This is right at the brake itself.
|
|
|
|
|
04-20-2014, 12:53 PM
|
#25 |
|
Not Yet Wild
Join Date: Mar 2014
Location: Redondo Beach
Posts: 22
|
Re: Disk Brakes
Thx Beach cart, I will check to see if I have 1/4 of cable.
|
|
|
|
|
04-20-2014, 07:48 PM
|
#26 |
|
Gone Wild
Join Date: Dec 2011
Location: Jacksonville Beach, FL
Posts: 606
|
Just for dome info, I have the Auscos on back and Jakes front I change the Jakes every 6-8 months, the outer wears from 1/8 to less then 16th. Most of the stopping is coming from front. Back pads are bring replaced in a month or so, they lasted 2.5 years.
|
|
|
|
|
04-22-2014, 11:35 PM
|
#27 |
|
Not Yet Wild
Join Date: Mar 2014
Location: Redondo Beach
Posts: 22
|
Re: Disk Brakes
Thx again Beach Cart
|
|
|
|
|
04-28-2014, 10:54 AM
|
#28 |
|
Not Yet Wild
Join Date: Mar 2014
Location: Redondo Beach
Posts: 22
|
Re: Disk Brakes
According to the Ausco manual, the specs are 1/4" of clearance between the yoke and housing. On mine I have a spring on them. I can't see how much clearance I have beacause of spring. The manual also says to remove the old spring from stock brakes so I'm confused! I can't figure this out! Am I supposed to remove this spring and check?
Any suggestions would help. Thx |
|
|
|
|
04-28-2014, 12:54 PM
|
#29 |
|
Gone Wild
Join Date: Dec 2011
Location: Jacksonville Beach, FL
Posts: 606
|
I believe that spring shoild have been removed at the install.
Sent from my Torque using Tapatalk |
|
|
|
|
04-28-2014, 03:05 PM
|
#30 |
|
Not Yet Wild
Join Date: Mar 2014
Location: Redondo Beach
Posts: 22
|
That's what I figured, I have plenty of material on my brake pads. My golf cart is not stopping at all when I apply the brakes. I will remove spring and update you.
Thx again Beach Cart. Sent from my iPhone using Tapatalk |
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Ezgo disk brakes | Electric EZGO | |||
| 93 Marathon 4 disk hydraulic brakes. | Electric EZGO | |||
| Disk brakes??? | Gas EZGO | |||
| CC Rear Disk Brakes | Electric Club Car | |||
| Jakes Disk Brakes | Lifted Golf Carts | |||
Linear Mode
