EZGO FSIP 400 amp Install question

JC@TSR · 07-15-2016, 03:29 PM

I got 400 amp FSIP controller 1204-001 36v to install in my 2007 Series Ezgo. Also bought a 400 amp Solenoid from Unlimited after seeing how much he helps on this site. My current controller is a Curtis PMC P/N 25864G09 S/N 7037-P12638L. It has a 4 wire connector with White-Black-Orange-Red going into it. Wiring info I have found are with the Converter, which people say to stay away from. The other I found is 1Red-2Black-3White on FSIP controller, but that leaves the Orange wire that goes to the Direction switch not used.

Any help would be great, I'm at camp now with everything to install this weekend if I can. :)

scottyb · 07-15-2016, 04:55 PM

Unless the FSIP control has half speed reverse option the orange wire would not be used.

JC@TSR · 07-15-2016, 05:02 PM

ok, so can I find out if it does with the serial number on the controller?
266276-409-3 Do I need to use the wire at all? I just don't want to screw the controller up by wiring something wrong.

scottyb · 07-15-2016, 05:08 PM

NO you do not need the half speed reverse wire connected to run. Just make sure it is taped up if it is going to be getting power from the F&R in reverse.

JC@TSR · 07-15-2016, 05:08 PM

Ok, my guess is that if this controller had that function it would have a 4th terminal on the right side of the controller for the orange wire correct?

scottyb · 07-15-2016, 05:09 PM

Quote:

Originally Posted by JC@TSR

Ok, my guess is that if this controller had that function it would have a 4th terminal on the right side of the controller for the orange wire correct?

yes, that pretty much sums it up. Are you sure your control is ITS compatible? no throttle converter needed?

JC@TSR · 07-15-2016, 05:09 PM

ok, great, thank you for the help!!!

JC@TSR · 07-16-2016, 03:51 PM

I wired everything according to this diagram. Solenoid clicks but no forward or reverse. Is this the wrong diagram for what I have?

JC@TSR · 07-16-2016, 03:53 PM

Also have the 3 cart harness wires on left of Controller from top to bottom
Red Black White

I got it used off of this site, my guess is the controller doesn't work.

JC@TSR · 07-16-2016, 05:14 PM

Just noticed you post about the ITS Scotty B, I couldn't find any info on it. You think that's the problem?

07-15-2016, 03:29 PM	#1
JC@TSR Not Yet Wild Join Date: May 2016 Posts: 31	EZGO FSIP 400 amp Install question I got 400 amp FSIP controller 1204-001 36v to install in my 2007 Series Ezgo. Also bought a 400 amp Solenoid from Unlimited after seeing how much he helps on this site. My current controller is a Curtis PMC P/N 25864G09 S/N 7037-P12638L. It has a 4 wire connector with White-Black-Orange-Red going into it. Wiring info I have found are with the Converter, which people say to stay away from. The other I found is 1Red-2Black-3White on FSIP controller, but that leaves the Orange wire that goes to the Direction switch not used. Any help would be great, I'm at camp now with everything to install this weekend if I can. :)
JC@TSR Not Yet Wild Join Date: May 2016 Posts: 31

07-15-2016, 04:55 PM	#2
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,402	Re: EZGO FSIP 400 amp Install question Unless the FSIP control has half speed reverse option the orange wire would not be used.

07-15-2016, 05:02 PM	#3
JC@TSR Not Yet Wild Join Date: May 2016 Posts: 31	Re: EZGO FSIP 400 amp Install question ok, so can I find out if it does with the serial number on the controller? 266276-409-3 Do I need to use the wire at all? I just don't want to screw the controller up by wiring something wrong.
JC@TSR Not Yet Wild Join Date: May 2016 Posts: 31

07-15-2016, 05:08 PM	#4
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,402	Re: EZGO FSIP 400 amp Install question NO you do not need the half speed reverse wire connected to run. Just make sure it is taped up if it is going to be getting power from the F&R in reverse.

07-15-2016, 05:08 PM	#5
JC@TSR Not Yet Wild Join Date: May 2016 Posts: 31	Re: EZGO FSIP 400 amp Install question Ok, my guess is that if this controller had that function it would have a 4th terminal on the right side of the controller for the orange wire correct?
JC@TSR Not Yet Wild Join Date: May 2016 Posts: 31

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

07-15-2016, 05:09 PM	#7
JC@TSR Not Yet Wild Join Date: May 2016 Posts: 31	Re: EZGO FSIP 400 amp Install question ok, great, thank you for the help!!!
JC@TSR Not Yet Wild Join Date: May 2016 Posts: 31

07-16-2016, 03:51 PM	#8
JC@TSR Not Yet Wild Join Date: May 2016 Posts: 31	Re: EZGO FSIP 400 amp Install question I wired everything according to this diagram. Solenoid clicks but no forward or reverse. Is this the wrong diagram for what I have?
JC@TSR Not Yet Wild Join Date: May 2016 Posts: 31

07-16-2016, 03:53 PM	#9
JC@TSR Not Yet Wild Join Date: May 2016 Posts: 31	Re: EZGO FSIP 400 amp Install question Also have the 3 cart harness wires on left of Controller from top to bottom Red Black White I got it used off of this site, my guess is the controller doesn't work.
JC@TSR Not Yet Wild Join Date: May 2016 Posts: 31

07-16-2016, 05:14 PM	#10
JC@TSR Not Yet Wild Join Date: May 2016 Posts: 31	Re: EZGO FSIP 400 amp Install question Just noticed you post about the ITS Scotty B, I couldn't find any info on it. You think that's the problem?
JC@TSR Not Yet Wild Join Date: May 2016 Posts: 31

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
FSIP Controller Question 3 wire	Electric Club Car
FSIP controller install	Electric EZGO
500 FSIP Controller install Series 03	Electric Club Car
FSIP Install question	Electric Club Car
500A FSIP Cotroller Install In My Precedent	Members Rides