|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
10-02-2016, 03:54 PM
|
#1 |
|
Not Yet Wild
Join Date: Apr 2016
Location: Central Texas
Posts: 60
|
91 EzGo Marathon Controller Conversion
Hello all...converting from Curtis 1204 to Alltrax SR48300.
From my 0-5K throttle sensor I have a blue wire that connected to the Curtis on J1 then a Blue and Brown wire that connected to J2 and J3 respectively. Can anyone tell me where these connectors convert to on the Alltrax? The Alltrax has a J1 (with black (sol-) blue (reverse) green (user) and red (ks1) connections and a J4 (throttle 1) and J5 (throttle 2) Thanks Rainman |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
10-03-2016, 12:14 AM
|
#2 |
|
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: 91 EzGo Marathon Controller Conversion
Curtis "Pin 1" = keyswitch. Curtis "pin 2 & 3" are throttle wires.
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Ezgo marathon conversion kit | Electric EZGO | |||
| Ezgo Marathon Resistor to Controller conversion kit | Design Center | |||
| 1991 Ezgo Marathon electric to gas conversion | Electric EZGO | |||
| Ezgo marathon to txt conversion. Custom paint. Before and after. | On Road Golf Carts! | |||
| Conversion of Marathon to controller | Electric EZGO | |||
Linear Mode
