|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
10-14-2016, 04:59 PM | #1 |
Not Yet Wild
Join Date: Oct 2015
Location: Seguin, Tejas
Posts: 56
|
Alltrax AXE 4485 rebuild???
Is rebuilding one of these possible? I have diagnosed my issues with my TXT to being a controller, and at this point, don't want to spend any substantial $ on it. I just want to get it running and sell it so I can buy another gas cart. I haven't been able to find a used or reman OEM controller for less than $200, so I'm hopeful that I can find a way to have this Alltrax rebuilt.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-14-2016, 05:08 PM | #2 |
Voltaholic
Join Date: Dec 2013
Location: Close to Navasota Texas
Posts: 934
|
Re: Alltrax AXE 4485 rebuild???
The AXE controller are epoxy potted, meaning the electronics are covered in an epoxy. They are basically not rebuildable.
Bad motors have been know to take controllers out with them so check your motor and the rest of the cart before putting in another controller. |
|
|
Similar Threads | ||||
Thread | Forum | |||
Alltrax axe | Electric EZGO | |||
Alltrax 4855 ITS 500A controller- rebuild or buy new? | Electric EZGO | |||
Alltrax 500 amp | Electric EZGO | |||
Alltrax,Alltrax,Alltrax | Electric Club Car | |||
Alltrax 400 or 500 PDS ? | Electric EZGO |