|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
10-31-2016, 09:04 AM | #1 |
Gone Wild
Join Date: Mar 2013
Posts: 495
|
RXV will only move maybe 1/2 mph
2010 rxv will only move maybe 1/2 mph with full charge. Can anyone tell me if they have had this issue before or where to start to looking????
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-31-2016, 08:12 PM | #2 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: RXV will only move maybe 1/2 mph
If you are not handy with a volt meter, send it in. If you are handy with DVM, download the Danaher Rxv troubleshooting guide & start with the tests that don't require an oscilloscope, like the temp sensor.
|
10-31-2016, 10:40 PM | #3 |
Gone Insane
Join Date: Oct 2015
Location: TN/NC/GA Tri-state area
Posts: 3,952
|
Re: RXV will only move maybe 1/2 mph
|
11-01-2016, 07:43 AM | #4 |
Not Yet Wild
Join Date: Nov 2011
Location: ORLANDO, FL
Posts: 25
|
Re: RXV will only move maybe 1/2 mph
tEMP sENSOR
|
11-01-2016, 11:09 AM | #5 |
Not Yet Wild
Join Date: Oct 2016
Location: Crosby, TX
Posts: 65
|
Re: RXV will only move maybe 1/2 mph
I just went through this same issue, and mine was the encoder bearing. Shop wanted close to $500 to replace and i was able to order the part on halloween with 15% off for $135 shipped. Of course i had to pay the $100 diagnostic fee also, but saved half the cost. My cart is a 2009 rxv.
|
11-03-2016, 08:45 AM | #6 |
Gone Wild
Join Date: Mar 2013
Posts: 495
|
Re: RXV will only move maybe 1/2 mph
Ok I will check the encoder bearing then. Sounds like a normal problem for the RXV
|
11-03-2016, 09:50 AM | #7 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: RXV will only move maybe 1/2 mph
Yeah, you will be right one of these times... I'm just wondering how these folks are "checking" the encoder. With oscilloscope?
|
11-03-2016, 11:20 AM | #8 |
Gone Wild
Join Date: Aug 2014
Location: Duncan Corners
Posts: 905
|
Re: RXV will only move maybe 1/2 mph
When slowing down -- cart jerks and lurches backwards......
----- encoder----- |
11-03-2016, 07:25 PM | #9 |
Gone Wild
Join Date: Feb 2015
Location: Quad cities
Posts: 334
|
Re: RXV will only move maybe 1/2 mph
Could have a bad battery unit goes into limp back home mode check it when driving with a volt meter
|
11-03-2016, 07:32 PM | #10 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: RXV will only move maybe 1/2 mph
|
|
|
Similar Threads | ||||
Thread | Forum | |||
G29 will not move | Electric Yamaha | |||
g9e move | Electric Yamaha | |||
1996 Series DS 48V won't move on ground, wheels barely move on jacks | Electric Club Car | |||
99 ez go won't move | Electric EZGO | |||
Doesn't move | Electric EZGO |