‘10 Precedent Brake Lights w/light kit help

[photodork]

Hello all, just bought my first cart and I am stumped after combing the forums. I have a 2010 precedent with an unknown aftermarket led light kit. The tail lights work, turn signals work and hazard flasher works. No brake lights. There are the three wires present under the floor near the pedal, not hooked uo to anything. I want to install a pressure switch on the face of the pedal but I connected the wires under the floor with no response from the led light clusters in the rear. I have looked at wiring diagrams from rhox and mad Jax and can’t seem to match up the colors with my cart. Any help would be appreciated.

I’ve attached photos of the headlight and tail light as well as under the dash for forensics. I don’t seem to have a voltage converter as I can’t find one anywhere on the cart.

Thanks in advance and I look forward to contributing as much as I can to the community.

[photodork]

I've ordered a surface mount pressure switch for the pedal and hope to install it this weekend, if anyone could lend a hand with wiring thoughts, I would greatly appreciate it!

[NoleFan4Ever]

PM Yawood or Sergio if no one else responds to this. They both have Precedent's and like Electrical....