|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
08-22-2011, 11:44 PM | #1 |
Not Yet Wild
Join Date: Jun 2010
Posts: 5
|
Curtis 1206sx resistor identification
I need the resistor values of the following resistors in the photo can anyone help? At least 2 of the resistors that are there now are not the correct value I just estimated and was wrong. If you could just take a good quality photo so I could see the color bands that would be great. Thanks
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-24-2011, 12:30 PM | #2 |
Not Yet Wild
Join Date: May 2011
Posts: 6
|
Re: Curtis 1206sx resistor identification
My 1206MX is already reassembled and out of town... But you may have some luck asking this guy. He knows a fair amount about these controllers.
http://mauiev.wordpress.com/curtiss-...ller-problems/ |
03-12-2012, 06:20 PM | #3 |
Not Yet Wild
Join Date: Mar 2012
Posts: 2
|
Re: Curtis 1206sx resistor identification
help saver value resistors because they are burned or placa1206mx plate photo to see colors thanks
|
03-14-2012, 07:38 PM | #4 |
Not Yet Wild
Join Date: May 2011
Posts: 6
|
Re: Curtis 1206sx resistor identification
I found a few photos that I took of the 1206MX board before re-installation to my cart. The configuration shown in the pictures was after repair and did work for me.
I do apologize to jordan_ciaramitaro for not finding these photos when previously asked. I do not have physical access to the cart anymore so these are all I have to help. Picture 1 Picture 2 Picture 3 |
03-18-2012, 09:31 PM | #5 |
Not Yet Wild
Join Date: Mar 2012
Posts: 2
|
Re: Curtis 1206sx resistor identification
I appreciate the help you provided saved me because I did not find any of information thanks thanks and good luck
|
05-28-2012, 12:44 PM | #6 |
Not Yet Wild
Join Date: May 2012
Posts: 60
|
Re: Curtis 1206sx resistor identification
Did you ever get the exact resistor values?
I am working on one with the same problem, all 4 output CMOS transistors popped and R3 and R9 are fried. Thanks |
05-28-2012, 12:55 PM | #7 |
Gone Wild
Join Date: Oct 2010
Location: Panama City, FL
Posts: 1,408
|
Re: Curtis 1206sx resistor identification
can you point out R3 and R9?
-sj |
05-28-2012, 02:47 PM | #8 |
Not Yet Wild
Join Date: May 2012
Posts: 60
|
Re: Curtis 1206sx resistor identification
Referencing Jordan Ciaramitaro's photos, specifically the close-up, the resistors are designated left to right as, R1, R4, R9, R3, R5' the next component is a diode. So it is the 3rd and 4th from the left.
|
05-30-2012, 10:00 AM | #9 |
Not Yet Wild
Join Date: May 2012
Posts: 60
|
Re: Curtis 1206sx resistor identification
|
08-28-2012, 10:58 AM | #10 |
Not Yet Wild
Join Date: Jul 2011
Posts: 1
|
Re: Curtis 1206sx resistor identification
Same here ...R3 and R9 burnt....does anybody have a value .. ? or color code for these ?
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Curtis PMC Burnt out Resistor, Help ! | Electric EZGO | |||
curtis 1206sx controller | Electric EZGO | |||
5TH speed resistor has a burned mark on resistor board and melted the wire | Electric EZGO | |||
EZGO 1206sx Controller Replacement info | Electric EZGO | |||
Need A Dcs 1206sx Controller | Electric EZGO |