reversing contactor

scottyb · 10-17-2013, 09:08 AM

Quote:

Originally Posted by rbuggies48IN

Definitely the Next-Project when I go to 48 volt. The technical expertise here is Extra Terrestrial!!

The brain trust here is out of this world.

DaveTM · 10-17-2013, 12:21 PM

You guys keep spewing out these compliments and the stores are gonna run outta tin foil. Then what?....eh?

kgsc · 10-17-2013, 12:48 PM

There's a reed switch in that diagram ?? OOhhhhh, you meant in the feed to this

Understood and a fuse probably wouldn't hurt either. Just thought this would give you the same circuit you had with the old rotary style. Neutral is Off..

branson · 05-22-2014, 08:10 AM

now that we have the schematic of figured out. can this thing be mounted in any orientation. I would like to mount it with the plungers horizontal. will it work properly this way?

scottyb · 05-22-2014, 08:19 AM

yes, mount it in a direction (orientation).

kgros3773 · 10-05-2016, 08:38 PM

ScottyB,
I just installed your kit on my EZGO TXT and it came with a different wiring diagram than the one in this post. I was wondering which one is the correct version. The differences is the M- is going to the A2 on the motor and B+ on the controller is going to the feed on the rev contractor.

scottyb · 10-05-2016, 08:46 PM

Quote:

Originally Posted by kgros3773

ScottyB,
I just installed your kit on my EZGO TXT and it came with a different wiring diagram than the one in this post. I was wondering which one is the correct version. The differences is the M- is going to the A2 on the motor and B+ on the controller is going to the feed on the rev contractor.

There is more than one way to skin this cat. This thread is 3 yrs old...Follow the directions you were sent.

10-17-2013, 12:21 PM	#102
DaveTM Gone Wild Join Date: Oct 2012 Location: Southwestern Pa. Posts: 6,215	Re: reversing contactor You guys keep spewing out these compliments and the stores are gonna run outta tin foil. Then what?....eh?

10-17-2013, 12:48 PM	#103
kgsc Gone Wild Join Date: Dec 2009 Location: Aiken, SC Posts: 13,188	Re: reversing contactor There's a reed switch in that diagram ?? OOhhhhh, you meant in the feed to this Understood and a fuse probably wouldn't hurt either. Just thought this would give you the same circuit you had with the old rotary style. Neutral is Off..

05-22-2014, 08:10 AM	#104
branson Not here yet Join Date: Sep 2013 Location: jupiter florida Posts: 504	Re: reversing contactor now that we have the schematic of figured out. can this thing be mounted in any orientation. I would like to mount it with the plungers horizontal. will it work properly this way?

05-22-2014, 08:19 AM	#105
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,419	Re: reversing contactor yes, mount it in a direction (orientation).

10-05-2016, 08:38 PM	#106
kgros3773 Not Yet Wild Join Date: Sep 2016 Posts: 2	Re: reversing contactor ScottyB, I just installed your kit on my EZGO TXT and it came with a different wiring diagram than the one in this post. I was wondering which one is the correct version. The differences is the M- is going to the A2 on the motor and B+ on the controller is going to the feed on the rev contractor.
kgros3773 Not Yet Wild Join Date: Sep 2016 Posts: 2

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

Similar Threads
Thread	Forum
Reversing Contactor, What is the purpose for these?	Electric EZGO
Reversing Contactor voltage	Electric golf carts
reversing a series motor without a reversing contactor?	Electric EZGO
Reversing switch or contactor?	Electric Club Car
Biggesst Reversing Contactor	Extreme DC!