Where does this battery warning light wire connect? 2003 Club Car DS

[Unicorn]

This should be easy. I doubt my warning light works because this wire is not connected. Can someone please tell me where to connect it? I appreciate the help.

IMG_2897.jpgIMG_2892.jpg


Sent from my iPhone using Tapatalk

[Swan]

the orange and white goes to the key switch , the brown goes to the obc harness

[Unicorn]

Originally Posted by Swan

the orange and white goes to the key switch , the brown goes to the obc harness

I don't see a brown one. I see an orange and white one into the ignition, a red one into the ignition, and then what looks to be an orange and yellow one not connected to anything. The orange and yellow one is connected to the warning light. take another look?

[Swan]

Section 12 E page 138

[Unicorn]

Thanks for the reference. Looks like my cart was rewired at some point with no attention to schematic wiring colors. I appreciate the link.


Sent from my iPhone using Tapatalk

[Down South]

I have a similar problem with a half butt rewired cart. The battery warning light is missing. I had figured that whoever did the wiring left the light laying behind the aftermarket dash.
When I pulled the dash, the light was nowhere to be found.

[Unicorn]

Originally Posted by Down South

I have a similar problem with a half butt rewired cart. The battery warning light is missing. I had figured that whoever did the wiring left the light laying behind the aftermarket dash.
When I pulled the dash, the light was nowhere to be found.

I may have to dig into my dash. Some people just want the cart to work rather than follow schematics. It amazes me the little random stuff you can find on a used cart. I would imagine the wiring inside the color casing is the same so no matter what the outside casing color is I can make it work?


Sent from my iPhone using Tapatalk

[Down South]

Originally Posted by Unicorn

I may have to dig into my dash. Some people just want the cart to work rather than follow schematics. It amazes me the little random stuff you can find on a used cart. I would imagine the wiring inside the color casing is the same so no matter what the outside casing color is I can make it work?


Sent from my iPhone using Tapatalk

Yup, you should be able to. Trace the wires back.

[_ogre]

Originally Posted by Unicorn

I doubt my warning light works because this wire is not connected.

i doubt your warning light works at all, the few i've seen don't
i installed a volt gauge

[Unicorn]

Originally Posted by _ogre

i doubt your warning light works at all, the few i've seen don't

i installed a volt gauge

Yeah I was thinking that I would be better of doing something like that. Good thought.


Sent from my iPhone using Tapatalk