|
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
09-06-2017, 07:12 PM | #11 |
Gone Wild
Join Date: May 2015
Location: Elberta Al a BAMA
Posts: 197
|
Re: 2010 Yamaha YDRE
Well we dropped the motor to check brushes and overall inspection. The brushes needed a little tlc but everything looked good. Mounted motor back to cart, still same issue. I'm lost.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-06-2017, 07:40 PM | #12 |
Gone Wild
Join Date: May 2015
Location: Elberta Al a BAMA
Posts: 197
|
Re: 2010 Yamaha YDRE
As I read through some posts, it seems Yamaha has a lot of throttle issues, most in here are All Traxx controllers, mine is a moric controller.
|
09-06-2017, 08:12 PM | #13 |
Gone Wild
Join Date: May 2015
Location: Elberta Al a BAMA
Posts: 197
|
Re: 2010 Yamaha YDRE
CGTech, to answer your question yes a big delay while coasting there is no pedal response until it almost stops coasting then it jumps to whatever position the throttle is in.
|
09-06-2017, 09:50 PM | #14 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: 2010 Yamaha YDRE
Not much throttle trouble at all here. Next to check is speed sensor magnet, it will be on the end of the motor, under the white sensor. I'm starting to suspect motor conroller problems.
|
09-07-2017, 10:38 AM | #15 |
Gone Wild
Join Date: May 2015
Location: Elberta Al a BAMA
Posts: 197
|
Re: 2010 Yamaha YDRE
Ok I will check speed sensor magnet, we did the push test and it does give some resistance, also I noticed that as soon as you lean on the cart or go to push it, I hear the solenoid click, I assume that is normal? if the magnet is ok, should I recommend a better or upgraded controller instead of just repairing the moric JW2-H6510-01, it seems a lil slow top end for a 48v cart. I saw were Scotty says don't go over 400amp controller unless customer wants upgraded motor. And thanks a million times over for getting back to us
|
09-07-2017, 04:56 PM | #16 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: 2010 Yamaha YDRE
I would get away from the Moric & never look back. And I totally agree with the amps limit.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
2010 Yamaha YDRE | Electric Yamaha | |||
2010 YDRE G29 regen questions | Electric Yamaha | |||
Alltrax programming 2010 ydre | Electric Yamaha | |||
2010 ydre high speed gear change | Electric Yamaha | |||
Alltrax xct 4800 or 48500 2010 ydre | Electric Yamaha |