I need help on a C54 conversion

[Muddog]

From the DPI manual:
"When the charger has determined the battery pack has reached
80-90% capacity, the Yellow and Green L.E.D.s both illuminate"
Near end of charge cycle both lites will illuminate.
60 volts is normal near end of cycle.
Let it finish charging.

[rib33024]

change the setting on your meter, or check the battery in it. Let it charge, until the charger turns off. It can get up to 65 volts before it turns off. Where did you read that when it gets to 60 volts unplug the charger??

[beaverislander]

Originally Posted by rib33024

change the setting on your meter, or check the battery in it. Let it charge, until the charger turns off. It can get up to 65 volts before it turns off. Where did you read that when it gets to 60 volts unplug the charger??

I did not read that. However, the charger had ran all night long and was still going in the morning, I waited a couple more hours and it never did turn off. This was unusual because generally it only take ~3 hours. It was fine for the first couple of weeks, so this change has me a little nervous. I suppose there is some type of safety measure on the new charger so it can't "overcharge," I'll let it go all night unless I hear otherwise.

[rib33024]

Originally Posted by beaverislander

I did not read that. However, the charger had ran all night long and was still going in the morning, I waited a couple more hours and it never did turn off. This was unusual because generally it only take ~3 hours. It was fine for the first couple of weeks, so this change has me a little nervous. I suppose there is some type of safety measure on the new charger so it can't "overcharge," I'll let it go all night unless I hear otherwise.

If your cart was charging fine for the last few weeks. and now it's not. Then you might have a problem. See what others say before you let it charge over night