G 16 yamaha

crash12888 · 06-14-2021, 06:45 AM

Completely closed at rest and not move until micro click.
I can't remember where the micro is but I'm thinking down by the throttle pedal under the floor mat and access cover.
Get close to the pedal and listen.
You might be able to adjust the cable back on top of the transaxle on the governor arm, maybe someone cranked it in tight to get more speed?

Chubbers · 07-03-2021, 09:15 PM

Thanks all for the direction
Turns out the governor and throttle linkage were way out of adjustment
Now other than a bit jerky on start it is 100% better Has a bit of a gas smell but only occasional

MattH · 07-04-2021, 06:59 AM

There should be at least a 1” pause in between the starter and motor. If the motor starts as soon as you touch the throttle, you will need to adjust your cables underneath the floor. Starter/Gen should come on between 5”-6”; motor between 4”-5”. Check this video out:

https://m.youtube.com/watch?v=_M7DMMLvyUg

06-14-2021, 06:45 AM	#11
crash12888 Gone Crazy Join Date: Jan 2007 Location: Chesterfield, Va Posts: 6,021	Re: G 16 yamaha Completely closed at rest and not move until micro click. I can't remember where the micro is but I'm thinking down by the throttle pedal under the floor mat and access cover. Get close to the pedal and listen. You might be able to adjust the cable back on top of the transaxle on the governor arm, maybe someone cranked it in tight to get more speed?

07-03-2021, 09:15 PM	#12
Chubbers Not Yet Wild Join Date: Apr 2021 Posts: 7	Re: G 16 yamaha Thanks all for the direction Turns out the governor and throttle linkage were way out of adjustment Now other than a bit jerky on start it is 100% better Has a bit of a gas smell but only occasional
Chubbers Not Yet Wild Join Date: Apr 2021 Posts: 7

07-04-2021, 06:59 AM	#13
MattH Getting Wild Join Date: Jun 2019 Location: Virginia Posts: 120	Re: G 16 yamaha There should be at least a 1” pause in between the starter and motor. If the motor starts as soon as you touch the throttle, you will need to adjust your cables underneath the floor. Starter/Gen should come on between 5”-6”; motor between 4”-5”. Check this video out: https://m.youtube.com/watch?v=_M7DMMLvyUg

Similar Threads
Thread	Forum
Yamaha g16 Jakes vs Yamaha HD shocks	Gas Yamaha
yamaha g16e and yamaha g19e same frame or no	Gas Yamaha
yamaha g16e and yamaha g19e same frame or no	Electric Yamaha
Yamaha Drive Suspension Ideas? and tire and wheel? on Yamaha Drive with a 600cc motor	On Road Golf Carts!
Wanted: Yamaha G1 rolling chassis (or any Yamaha really)	Golf Carts and Parts

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum