03-02-2022, 05:24 PM | #1 |
Not Yet Wild
Join Date: Apr 2014
Location: Midwest
Posts: 60
|
Evolution 110 ah install issues Precedent
Hey everyone,
I am in the middle of installing a new lithium ion battery Pack From evolution golf cars. It came with an install kit in brackets etc. for club car precedent. I’m having an issue with the battery pack lining up with the brackets and also sitting too tall and hitting the seat. I’m sure I am doing something wrong and silly so I so if anyone has put one in or has any ideas let me know! Thank you all |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-02-2022, 06:47 PM | #2 |
Not Yet Wild
Join Date: Apr 2014
Location: Midwest
Posts: 60
|
Re: Evolution 110 ah install issues Precedent
|
03-02-2022, 07:03 PM | #3 |
Gone Wild
Join Date: Dec 2016
Location: Kingsland, Georgia
Posts: 1,825
|
Re: Evolution 110 ah install issues Precedent
It appears to me that the battery pack needs to sit directly on the battery tub. Those brackets are holding it too high. If they are tie down brackets, maybe they should be on top of the battery feet instead of under them.
What say others? |
03-02-2022, 09:36 PM | #4 |
Not Yet Wild
Join Date: Apr 2014
Location: Midwest
Posts: 60
|
Re: Evolution 110 ah install issues Precedent
Finally - I got it to fit ! Had to remove some material in the tub, specifically the plastic on top of rods for the battery hold downs. According to the directions no modifications necessary but that’s not the case at all.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
2007 Precedent Madjax Ultimate Plus Install Issues | Electric Club Car | |||
Issues after lithium and FN1 install | Electric EZGO | |||
new xct alltrax install issues | Electric Club Car | |||
Precedent XCT500, MZJ400A Install - Solenoid activation issues | Electric Club Car | |||
Issues with controller install | Electric EZGO |