|
Gas Club Car Gas DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
04-15-2011, 07:13 PM | #1 |
Not Yet Wild
Join Date: Apr 2011
Posts: 66
|
1985 Club Car Flat Head Carb. settingas
Hi,
After changing plug, air filter and fuel filter the cart still stops and goes. I'd say fule starvation because if I press the choke button, it goes. I have pulled the carb and am cleaning a huge amount of varnish. The center needle will not come apart. The one that's up the shaft the bolt for the bowl. I have that soaking over night in carb cleaner. What I need to know is what are the two settings for the the needles? One appeared to be a needle valve and I tightened it 2 and half turns before taking it out then replaceded it by tightening it down then backing it out 2 and half turns. The other screw was almost already tightened down. I have removed it out and it's soaking as the liitle orifice looks cloged but what is the correct setting for that screw. I'm sorry I don't know what the technical name is for the two screws. One has a spring and that was the 2 and half turn one. The other has no spring. Thanks, Jim |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-16-2011, 11:41 AM | #2 |
Not Yet Wild
Join Date: Apr 2011
Posts: 66
|
Re: 1985 Club Car Flat Head Carb. settingas
Thanks to any one that might reply, but I put everything back together and it's now working without the start stop and choke. Cleaning the carb seems to have worked. Now if I could just find the differntial and transmission drain and fill plugs I would be very happy.
Jim |
04-16-2011, 09:41 PM | #3 |
The Last Moja Morani
Join Date: Jan 2007
Location: jumping from cart to cart
Posts: 8,975
|
Re: 1985 Club Car Flat Head Carb. settingas
i know this is late but there are no carb settings......as for drains look on the right side they should be there.................................
|
04-17-2011, 06:53 AM | #4 |
Not Yet Wild
Join Date: Apr 2011
Posts: 66
|
Re: 1985 Club Car Flat Head Carb. settingas
Thanks but ther were two screws that I removed. One had a spring one didn't. I took the one with the spring out and after cleaning it replaced it all the way in and then backed it out 2 and a half turns. The other one was shorter and was tightend down. Cart works.
|
04-17-2011, 10:27 AM | #5 |
The Last Moja Morani
Join Date: Jan 2007
Location: jumping from cart to cart
Posts: 8,975
|
Re: 1985 Club Car Flat Head Carb. settingas
yeah thats the air mixture do dad that should be the only one the other one you just tighten down..............................
|
04-17-2011, 12:10 PM | #6 |
Not Yet Wild
Join Date: Apr 2011
Posts: 66
|
Re: 1985 Club Car Flat Head Carb. settingas
Thanks
|
|
|
Similar Threads | ||||
Thread | Forum | |||
looking for flat head club car parts | Golf Carts and Parts | |||
1990 Club car With flat head Rev limiter question and govenor question | Gas Club Car | |||
Flat head bore size? | Gas Club Car | |||
88 Flat Head Motor Rebuild. | Gas Club Car | |||
What float level for flat head? | Gas Club Car |