|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
10-16-2011, 10:44 PM | #1 |
Not Yet Wild
Join Date: Jun 2008
Location: Woodland Hills So Cal
Posts: 43
|
83 1/2CC no reverse
I have a 1983 1/2 CC 36V putting back together I have no reverse (new F&R & micros switches) got cart in pieces.
this is the diagram I used with jumper This is the diagram i used to connect the batteries and switches diagram show that another cable goes to battery 4 ( for half speed rev)???? the above switch diagram doesn't, is this why i don't have reverse if so do I have to eliminate jumper? and which contact post does it connect too photo of my F&R switch pictures are big help if any body has 5 solenoid cart hoping to get cart done so my kid can use for this hunting season |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-17-2011, 08:06 AM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: 83 1/2CC no reverse
Does your cart have 2 or three peddles?
|
10-17-2011, 08:30 AM | #3 |
Not Yet Wild
Join Date: Jun 2008
Location: Woodland Hills So Cal
Posts: 43
|
Re: 83 1/2CC no reverse
2 peddles (if you mean gas & brake) I will wire per your diagram, I hadn't tried moving A2 to other end of solenoid and connecting F&R to drivers side solenoid pack
|
10-17-2011, 09:28 AM | #4 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: 83 1/2CC no reverse
I have not seen an F&R wired like that large diagram you posted?
|
10-17-2011, 03:11 PM | #5 |
Not Yet Wild
Join Date: Jun 2008
Location: Woodland Hills So Cal
Posts: 43
|
Re: 83 1/2CC no reverse
Copied it from vintagegolfcart site
OK I hooked it up per your diagram.....NOW no forward but I have full speed reverse I removed jumper added a cable and hooked it up to battery 4 (driver side middle) I now have half speed forward do I have the speed switch box wire in the right place on F&R motor hook as follows A1 to pass side inside F&R switch S1 to top (pass side) bar of F&R switch A2 to (pass side last) solenoid S2 to Neg battery 6 (drivers side front) Maybe I should start fresh what wiring diagrams would you recommend? |
10-17-2011, 03:40 PM | #6 | |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: 83 1/2CC no reverse
Quote:
http://www.buggiesgonewild.com/elect...-diagrams.html Scroll down to 81-85 CC |
|
10-17-2011, 04:48 PM | #7 |
Not Yet Wild
Join Date: Jun 2008
Location: Woodland Hills So Cal
Posts: 43
|
Re: 83 1/2CC no reverse
Had that one but I didn't use it cause the switch didn't match that's why I used the one above.
will start fresh Thanks |
10-19-2011, 12:34 PM | #8 |
Not Yet Wild
Join Date: Jun 2008
Location: Woodland Hills So Cal
Posts: 43
|
Re: 83 1/2CC no reverse
Got rid of the diagrams that i started with and started over
Cart now works 13-14 mph GPS forward never could get reverse to work with a jumper in place Thanks for your help Finished cart photos |
10-19-2011, 01:07 PM | #9 |
Medicare Recipient
Join Date: Jun 2011
Location: West Michigan
Posts: 3,541
|
Re: 83 1/2CC no reverse
|
Tags |
final wiring help |
|
|
Similar Threads | ||||
Thread | Forum | |||
wiring a reverse light to the reverse buzzer? | Gas Yamaha | |||
DCS in reverse and reverse in forward | Electric EZGO | |||
Foward in reverse and reverse in forward | Electric Club Car | |||
Reverse alarm sounds in Forward, wont go forward or reverse | Electric Club Car | |||
Reverse alarm stuck - motor won't run forward or reverse | Electric EZGO |