|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
11-27-2012, 07:25 AM | #21 |
Not Yet Wild
Join Date: Nov 2012
Location: Slapout AL
Posts: 37
|
Re: Solenoid or Controller?
Didn't check that Scotty. I do know that the cam needs replacing. Loose and pitted studs. One is recessed. Possible that the f&r micro switch is bad? That's the only micro switch that I did not replace.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-27-2012, 08:33 AM | #22 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Solenoid or Controller?
It sounds to me like you may need a complete new F&R before you can expect this cart to run. If you can check for continuity through the F&R contacts... A positive ohms continuity test is no guaranty the F&R will work, but if the ohms does not work the current won't run through the switch. see below:
|
11-27-2012, 12:33 PM | #23 |
Not Yet Wild
Join Date: Nov 2012
Location: Slapout AL
Posts: 37
|
Re: Solenoid or Controller?
Going to contact you today about a new switch. Thanks Scotty.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
ez go dcs does nothing solenoid or controller? | Electric EZGO | |||
solenoid/controller | Electric EZGO | |||
36V 400 Amp Controller and solenoid | Golf Carts and Parts | |||
dcs controller and solenoid | Golf Carts and Parts | |||
'99 EZ GO TXT Won't Run Solenoid/Controller? | Electric EZGO |