|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
12-27-2014, 11:29 AM | #11 |
Getting Wild
Join Date: Jul 2011
Posts: 138
|
Re: 95 medalist problem
the cart is a series cart, i bought an upgrade package from Scotty B three years ago. the solenoid clicks when it won't go and the alltrax controller lights up. the controller is a 500 amp progamable
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-27-2014, 01:03 PM | #12 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: 95 medalist problem
The controller should blink Green 4 times (ITS throttle selected), then go to steady Green.
Push the pedal to floor. Does LED on controller turn to Yellow (Amber)? If so it means the controller is seeing a 100% throttle signal. |
01-11-2015, 01:51 PM | #13 |
Getting Wild
Join Date: Jul 2011
Posts: 138
|
Re: 95 medalist problem
scottyb, the solenoid clicks and the controller lights up when it dosn't go
|
01-11-2015, 01:55 PM | #14 |
Getting Wild
Join Date: Jul 2011
Posts: 138
|
Re: 95 medalist problem
johnnieB, if it went amber what does that mean? and whats the fix thanks
|
01-11-2015, 02:28 PM | #15 | ||
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: 95 medalist problem
Quote:
Quote:
The fix is finding out why the controller is not seeing a 100% throttle signal from the ITS and fixing it. |
||
01-11-2015, 02:34 PM | #16 |
Getting Wild
Join Date: Jul 2011
Posts: 138
|
Re: 95 medalist problem
JohnnieB, the controller blinked 4 greens when the pedal was to the floor it went amber, so if im reading right the controller is seeing 100% throttle signal. So i'm asking if it's a controller problem or its problem. thanks for your time
|
01-11-2015, 04:27 PM | #17 | |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: 95 medalist problem
Quote:
Measure the voltage between the B- and M- terminals on top of controller. Should be FULL pack voltage when pedal is pushed just far enough for solenoid to click. If you don't get any voltage, there is an open in the high current cables, connections or contacts. If you get significantly less than full pack voltage, there is high resistance in the high current cables, connections or contacts. ------ If you do get pack voltage, press pedal to floor and the voltage should decrease to zero, or near zero. If it doesn't, the controller is bad. If it does decrease to zero, the motor should be turning, or something should be getting hot smoking. |
|
01-11-2015, 05:29 PM | #18 |
Getting Wild
Join Date: Jul 2011
Posts: 138
|
Re: 95 medalist problem
thanks JohnnieB, will you know what i find
|
01-25-2015, 02:49 PM | #19 |
Getting Wild
Join Date: Jul 2011
Posts: 138
|
Re: 95 medalist problem
ok, gave up took cart to a dealer and the diagnosis was the solenoid. I guess the solenoid can still click and be going bad? thanks
|
01-25-2015, 03:12 PM | #20 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: 95 medalist problem
|
|
|
Similar Threads | ||||
Thread | Forum | |||
95 medalist steering problem | Electric EZGO | |||
94 Medalist leaf spring problem | Electric EZGO | |||
96 ezgo medalist brake problem? | Electric EZGO | |||
94 medalist electric problem | Electric EZGO | |||
1995 EZ-Go Medalist Differential Problem | Electric EZGO |