|
|
|||||||
| Electric Club Car Electric DS, and Precedent golf cars |
  |
|
|
Thread Tools | Display Modes |
05-13-2017, 03:32 PM
|
#1 |
|
Not Yet Wild
Join Date: May 2017
Location: Carl Junction, MO
Posts: 11
|
2006 ds will not move after crossing over motor
I was installing a back flip seat kit this afternoon. I did not disconnect batteries. Did not think would be an issue.
I dropped wrench on top of the motor and crossed the green and orange wires on top of the motor. Now it will not move. The solenoid appears to be good. I tested both sides. I also tested the green and orange with meter and getting 48v there also. So obviously fried something. OBC? Controller? Please help! |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
05-13-2017, 07:49 PM
|
#2 |
|
Gone Wild
 Join Date: Sep 2015
Location: Cincinnati, Ohio
Posts: 1,354
|
Re: 2006 ds will not move after crossing over motor
I'm not positive what you fried, but this will probably serve as a lesson to ALWAYS put the cart in tow mode and disconnect battery positive and negative.
|
|
|
|
|
05-13-2017, 08:30 PM
|
#3 |
|
Old Sky Soldier
Join Date: Dec 2011
Location: Kentucky
Posts: 3,881
|
Re: 2006 ds will not move after crossing over motor
You might have let the smoke out of the controller.
|
|
|
|
|
05-13-2017, 08:57 PM
|
#4 | |
|
Not Yet Wild
Join Date: May 2017
Location: Carl Junction, MO
Posts: 11
|
Re: 2006 ds will not move after crossing over motor
Quote:
|
|
|
|
|
|
05-13-2017, 09:00 PM
|
#5 |
|
Gone Wild
Join Date: Sep 2015
Location: Cincinnati, Ohio
Posts: 1,354
|
Re: 2006 ds will not move after crossing over motor
wait until Dave @ Revolution chimes in....he knows for sure what you did....
Paging Dave....Dave claen up in aisle 1 |
|
|
|
|
05-14-2017, 12:18 PM
|
#6 |
|
Bonafide Nincompoop
Join Date: Dec 2015
Location: Charlottesburg Va
Posts: 8,987
|
Re: 2006 ds will not move after crossing over motor
Controller is toast. Expensive mistake there. Remember to always disconnect the batteries from now on.
|
|
|
|
|
05-14-2017, 04:46 PM
|
#7 | |
|
Not Yet Wild
Join Date: May 2017
Location: Carl Junction, MO
Posts: 11
|
Re: 2006 ds will not move after crossing over motor
Quote:
|
|
|
|
|
|
05-14-2017, 06:52 PM
|
#8 |
|
Gone Wild
Join Date: Sep 2015
Location: Cincinnati, Ohio
Posts: 1,354
|
Re: 2006 ds will not move after crossing over motor
Well now you've opened up a whole new conversation.....
IF you are replacing the controller anyway, why not upgrade and get an Alltrax 400 or 500 amp controller. 2 gauge cables and a new motor for speed and torque..... |
|
|
|
|
05-14-2017, 07:58 PM
|
#9 |
|
Gone Wild
Join Date: Oct 2016
Location: Dundee quebec
Posts: 3,190
|
Re: 2006 ds will not move after crossing over motor
The "accident" sure makes a compelling argument to upgrade if a wife/girlfriend objects,,,,
  |
|
|
|
|
05-14-2017, 08:09 PM
|
#10 |
|
revolutiongolfcars.com
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,224
|
Re: 2006 ds will not move after crossing over motor
Controller is damaged. No doubt about it. Perfect time to get an Alltrax.
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 2006 txt will not move | Electric EZGO | |||
| My 2006 TXT will not move. | Electric EZGO | |||
| 93 TXT 4 Stoke will not run after crossing creek | Gas EZGO | |||
| Crossing a yamaha with a Arctic cat | Big Block Talk! | |||
Linear Mode
