|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
07-21-2017, 12:27 PM | #1 |
Not Yet Wild
Join Date: Jul 2017
Location: Moncks Corner, SC
Posts: 43
|
FWD and REV switch cabel question
Does anyone have a lead on where to obtain the 2 #10 ring terminals for the FWD and REV switch. I am upgrading to 2 awg cables and have only found something as small as 1/4. Could I use a washer on both sides of the cable?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-21-2017, 12:39 PM | #2 |
Guest
Posts: n/a
|
Re: FWD and REV switch cabel question
i think i used 2 GAUGE COPPER 3/8 RING CONNECTOR
http://www.ebay.com/itm/5-LOT-2-AWG-...3D311554243815 |
07-21-2017, 12:43 PM | #3 |
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: FWD and REV switch cabel question
Typically it would be better to use a reversing contactor with 2ga cable, but here are some options:
Singles: https://www.digikey.com/product-deta...290-ND/304448410 packs: http://www.ebay.com/itm/2-Ga-Ring-Te...-/262636592979 |
07-21-2017, 06:23 PM | #4 |
Not Yet Wild
Join Date: Jul 2017
Location: Moncks Corner, SC
Posts: 43
|
Re: FWD and REV switch cabel question
Why didn't I think about Fleabag? I am going to go to reversing contacts in the future but not right now.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
PDS FNR switch question | Electric EZGO | |||
F&R Switch Question | Electric EZGO | |||
HD cabel difference(s) | Electric EZGO | |||
RXV run/tow switch question | Electric EZGO | |||
Key switch & Kill switch question | Gas Club Car |