08-14-2017, 09:49 AM | #1 |
Not Yet Wild
Join Date: Apr 2017
Location: Springfield, IL
Posts: 3
|
Center cap help
I have recently installed new 10 inch factory style rims on my clubcar. After seeing the wheels on I wanted a little more flare and something to cover the front wheel hubs. I purchased and installed the push through SS center caps and loved the look they provided. However as you all know there is no tolerance between the wheel and the hub with these style wheels and my cart was wobbly wobbly when I took off.
Does anybody have a solution to this problem? I have looked high and low for something to work but don't want to keep ordering stuff to see if it works. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-14-2017, 02:01 PM | #2 |
Crazy Wild
Join Date: Jun 2015
Location: Carolina Lowcountry
Posts: 796
|
Re: Center cap help
Do you have the correct size caps? When they push thru, are the cap flanges flush to the back of the rim?
It sounds like you do not have your lugs nuts tightened properly, your wheels are not seated on the hub or you have the wrong size caps. I've never seen flanges on a centercap that are thick enough to have an effect on the wheel mounting to the cart. |
|
|
Similar Threads | ||||
Thread | Forum | |||
Center cap help | On Road Golf Carts! | |||
GTW center cap | Lifted Golf Carts | |||
Project Center | Garage and Workshop | |||
center to center measurement? | Big Block Talk! |