07-27-2010, 11:07 AM | #21 |
Not Yet Wild
Join Date: Jul 2010
Posts: 1
|
Re: Running
I have a 2000 Easy Go.
I replaced the batteries 2 mo. ago. I charge batteries each time I use it. Has been running very well. Yesterday I was going to use it and found no power at all. No light on charge meter. No nothing. Visually, wiring looks good. Today the power meter shows half charge and is connected to charger which is on. Has power, but partially discharged. What could the problem be?? Thanks Chuck |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-27-2010, 06:20 PM | #22 |
Not Yet Wild
Join Date: Apr 2010
Posts: 34
|
Re: Running
Ok changed all the cables like you said how ever now it goes forward in reverse and reverse in forward. And I did figure out were you put the blk red and white wires in the adapter it is not making good connection any suggestions
|
07-27-2010, 09:51 PM | #23 |
Gone Wild
Join Date: Jun 2010
Location: Central Florida
Posts: 2,757
|
Re: Running
ok, reverse the S1 and S2 wires and that will solve your direction problems.
are you talking about the blanck and white that go to the ITS? And the red that goes to the solenoid? are you saying the 5 pin connector isn't making good connection to the adapter? |
07-28-2010, 06:42 AM | #24 |
Not Yet Wild
Join Date: Apr 2010
Posts: 34
|
Re: Running
Yes that is correct
|
07-28-2010, 05:53 PM | #25 |
Gone Wild
Join Date: Jun 2010
Location: Central Florida
Posts: 2,757
|
Re: Running
hmmmm let me look around tomorrow, I may have a replacement 5 pin connector that I can locate.
|
07-28-2010, 07:21 PM | #26 |
Not Yet Wild
Join Date: Apr 2010
Posts: 34
|
Re: Running
Ok thanks let me know
|
07-29-2010, 10:57 AM | #27 |
Not Yet Wild
Join Date: Apr 2010
Posts: 34
|
Re: Running
Just wondering if you cannot find the pin connector can I solder the wires diredtly to the 5 pin
|
07-29-2010, 08:09 PM | #28 |
Gone Wild
Join Date: Jun 2010
Location: Central Florida
Posts: 2,757
|
Re: Running
I have 1 more place to look but it isn't looking promising......
As for soldering directly to the pins, I don't think that would be a good idea. If there is an Autherized E-Z-GO rep on here, they should be able to hook you up with the harness. |
07-30-2010, 11:18 AM | #29 |
Not Yet Wild
Join Date: Apr 2010
Posts: 34
|
Re: Running
Question I have been using but connectors to make the contact could these be coming lose and causing the adapter to keep going out or is what I'm doing alright just need to make them tighter?
|
07-30-2010, 08:21 PM | #30 |
Gone Wild
Join Date: Jun 2010
Location: Central Florida
Posts: 2,757
|
Re: Running
The butt connectors should be fine (did you use the type that have the shrink tube built in?), just make sure you have good crimps on them.
I have searched high and low and I know I have one of those 5 pin connectors but I can't for the life of me find it at the moment...... |
|
|
Similar Threads | ||||
Thread | Forum | |||
Am I running enough oil? | Gas EZGO | |||
88 cc not running | Electric Club Car | |||
88 cc not running | Electric Club Car | |||
Its Running | Gas Yamaha |