|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
09-08-2010, 07:05 AM
|
#1 |
|
Not Yet Wild
Join Date: Sep 2008
Posts: 4
|
EZgo 1997 XI 875 Wire melting
I am haveing problems with my forward and reverse lever. One of the wires on the back of the switch is melting down. It is the wire at the six o'clock position. The wire goes to the controller.Could it be a bad switch, wire or Controller. I have taken apart the switch and cleaned it Looks to be ok.Also repaired end of wire that melted off.Once I took it for a test drive and it started to smoke the wire again
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
09-08-2010, 01:25 PM
|
#2 |
|
Gone Wild
Join Date: Jun 2010
Location: Central Florida
Posts: 2,757
|
Re: EZgo 1997 XI 875 Wire melting
you have a weak connection at that location. Could be a dirty stud on the F&R board or cam or is could be that the nut holding the wire in place is simply causing a bad connection.
|
|
|
|
|
09-08-2010, 02:07 PM
|
#3 |
|
Not Yet Wild
Join Date: Sep 2008
Posts: 4
|
Re: EZgo 1997 XI 875 Wire melting
I will try replacing the stud thanks
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 1997 XI 500 EZGO wiring | Electric EZGO | |||
| 1997 EZGO wont run | Electric EZGO | |||
| 1997 ezgo | Gas EZGO | |||
| 1997 EZGO TXT | Electric EZGO | |||
| 1997 Ezgo Dcs | Golf Carts and Parts | |||
Linear Mode
