|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
09-18-2010, 09:55 PM | #11 |
Just one day at a time
Join Date: Sep 2009
Location: South TX
Posts: 8,650
|
Re: I think I broke my rearend,,,,,
These axle's act just like a vehicle when you pick it off the ground, you spin the wheel on one side and the other will spin the opposite. Try this while like putting something on the other side to keep it from spinning, if it still spins then that's the side is stripped, if not try the other way.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-18-2010, 10:12 PM | #12 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: I think I broke my rearend,,,,,
I don't know if that is gonna work. I jack up one wheel and run the carts all the time...
|
09-18-2010, 10:28 PM | #13 |
Gone Wild
Join Date: Jun 2010
Location: Central Florida
Posts: 2,757
|
Re: I think I broke my rearend,,,,,
It will work. The axle is a limited slip, that is why you can lift one wheel and get it to turn even though the other is on the ground.
|
09-18-2010, 10:32 PM | #14 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: I think I broke my rearend,,,,,
yeah, but. What he is saying is chock one wheel and if the other turns it is striped? Am I reading it wrong? That's what i get from that post?
|
09-18-2010, 10:36 PM | #15 |
Gone Wild
Join Date: Jun 2010
Location: Central Florida
Posts: 2,757
|
Re: I think I broke my rearend,,,,,
oh I read it wrong.......
|
09-18-2010, 11:17 PM | #16 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: I think I broke my rearend,,,,,
basically, he could pull a drum and inspect the splines...... they are pretty obvious when stripped... I would do the passenger side first.....
|
09-19-2010, 12:23 PM | #17 |
Getting Wild
Join Date: Mar 2008
Posts: 105
|
Re: I think I broke my rearend,,,,,
That's what it was,but is was on the drivers side.
|
09-19-2010, 02:50 PM | #18 |
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: I think I broke my rearend,,,,,
|
09-19-2010, 02:53 PM | #19 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: I think I broke my rearend,,,,,
Good deal, Make sure to get a TxT electric drum. There are a few different ezgo drums .... and always make sure you are stopped before reversing direction.
|
09-19-2010, 02:59 PM | #20 | |
prop. A$$hole's Garage
Join Date: Dec 2007
Location: Deep inside the Central Scrutinizer (77096)
Posts: 1,587
|
Re: I think I broke my rearend,,,,,
Quote:
Torque to 120 ft. lb., if the nut does not line up with the cotter pin hole, tighten until it does and install a new cotter pin.. DO NOT loosen to line up the cotter pin hole.. |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
94 cc I BROKE SOMETHING! | Electric Club Car | |||
Is my generater broke? | Gas Yamaha | |||
Broke my 350 | Gas EZGO | |||
tensioner broke again | Gas Yamaha | |||
Broke something again!!!!! | Lifted Golf Carts |