|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
09-21-2010, 05:10 PM
|
#1 |
|
Not Yet Wild
Join Date: Jun 2009
Posts: 11
|
Help 1999 ezgo
 i have read of problems on the board but I don't see mine...sorry I have a 1999 Ez-Go electric golf cart, a few weekends ago cart was working fine. then stopped going forward, just backwards. After looking at the cart I found that the bottom wire on the cart was burnt. (at the end) so went pick up another cable, when changing it I noticed that the bottom poll was loose. looking closer the bolt was not making contact. (it was burnt)..so I change it and put a brand new forward/reverse switch. but you guessed it still no Forward just reverse. any clue what to try next. Thanks....Heath |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
09-21-2010, 05:40 PM
|
#2 |
|
The Last Moja Morani
 Join Date: Jan 2007
Location: jumping from cart to cart
Posts: 8,975
|
Re: Help 1999 ezgo
have you noticed a speed increase in reverse?....................................
 |
|
|
|
|
09-22-2010, 07:14 AM
|
#3 | |
|
Not Yet Wild
Join Date: Jun 2009
Posts: 11
|
Re: Help 1999 ezgo
Quote:
Not really, but when I lost forward I parked it to try to fix. and so far no luck, I did have to drive in reverse to park it and did not feel any different... |
|
|
|
|
|
09-22-2010, 08:11 AM
|
#4 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: Help 1999 ezgo
Can you test micro switches just to be sure they work?
Is there no solenoid click in forward? Just clicks in reverse? |
|
|
|
|
09-23-2010, 07:29 AM
|
#5 | |
|
Not Yet Wild
Join Date: Jun 2009
Posts: 11
|
Re: Help 1999 ezgo
Quote:
the micro switches on the f/R switch are all new. (the solenoid clicks in both foraward and reverse. changed it about 3 months ago...but that was not the problem then. it was the micro witch in the floor board.) checked all wires going to the control, checked all wires going to the back of cart all look good. not sure what to try next. |
|
|
|
|
|
09-23-2010, 07:32 AM
|
#6 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: Help 1999 ezgo
You might have a controller failure.
|
|
|
|
|
09-23-2010, 07:52 AM
|
#7 | |
|
Not Yet Wild
Join Date: Jun 2009
Posts: 11
|
Re: Help 1999 ezgo
Quote:
|
|
|
|
|
|
09-23-2010, 08:06 AM
|
#8 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: Help 1999 ezgo
Check the power output from the controller with your multi meter(DVM). Connect the negative probe to the controller's M- terminal and positive to the B+ terminal. Press the accelerator and watch to see if the voltage increases. It should increase from a reading of 0 to the full voltage of the battery. If there is no voltage present in reverse the controller is bad.
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 1999 EZGO Project | Golf Carts and Parts | |||
| 1999 Gas Ezgo won't go | Gas EZGO | |||
| 1999 Ezgo Txt | Electric EZGO | |||
| 1999 Ezgo Electric | Electric EZGO | |||
| 1999 electric ezgo | Electric EZGO | |||
Linear Mode
