Ezgo won't go

LostHusker · 05-02-2011, 07:46 PM

Here you go

dino1028 · 05-02-2011, 07:54 PM

K mine has the little red wire coming off the screw terminal and it's just stops doesn't have the white thing or that other red wire that u are saying to jump it was running fine then it just stoped I cleaned all the batts and it worked again parked it for like an hour and never ran again

dino1028 · 05-02-2011, 08:02 PM

I will be able to check. It out better tomarrow when I have my meter check the pack voltage and get back with u

LostHusker · 05-02-2011, 08:40 PM

dino

You will need to have the meter on hand to check things from here on out. You will see if you get your pack voltage across your solenoid, and if there is pack voltage at the small wires as well. Is the cover over your controller area?

dino1028 · 05-02-2011, 08:45 PM

I will check that and my cover is on the controller i will get back with u

todo_brane_ded · 05-02-2011, 09:01 PM

Apparently not all EZ's have a reed switch. Mine doesn't have one either. Mine's an '08.....

dino1028 · 05-03-2011, 03:35 PM

Pack voltage is 36.8 4 of the batts reed 6.2 the other reed right at 6 r the ones reed 6 bad I have it fully charged

dino1028 · 05-03-2011, 03:47 PM

How do u check the small post on the solenoid on the big ones if I put the red on the terminal and the negative on the - on the Batt it reeds 36.1 but I am not getting any reeding on the small post when I push the pedal

dino1028 · 05-03-2011, 04:53 PM

Ok go the troubleshootin Gide says to replace solenoid but it's welded and when I jump it it still doesn't work is it bad???

scottyb · 05-03-2011, 06:50 PM

You jumpered the large posts on the solenoid? Not the small ones, right?

key on ... cart 'in gear' ... 36+ volts.... no go? not good. when did it stop?

05-02-2011, 07:46 PM	#21
LostHusker Just one day at a time Join Date: Sep 2009 Location: South TX Posts: 8,650	Re: Ezgo won't go Here you go

05-02-2011, 07:54 PM	#22
dino1028 Getting Wild Join Date: Mar 2009 Posts: 124	Re: Ezgo won't go K mine has the little red wire coming off the screw terminal and it's just stops doesn't have the white thing or that other red wire that u are saying to jump it was running fine then it just stoped I cleaned all the batts and it worked again parked it for like an hour and never ran again
dino1028 Getting Wild Join Date: Mar 2009 Posts: 124

05-02-2011, 08:02 PM	#23
dino1028 Getting Wild Join Date: Mar 2009 Posts: 124	Re: Ezgo won't go I will be able to check. It out better tomarrow when I have my meter check the pack voltage and get back with u
dino1028 Getting Wild Join Date: Mar 2009 Posts: 124

05-02-2011, 08:40 PM	#24
LostHusker Just one day at a time Join Date: Sep 2009 Location: South TX Posts: 8,650	Re: Ezgo won't go dino You will need to have the meter on hand to check things from here on out. You will see if you get your pack voltage across your solenoid, and if there is pack voltage at the small wires as well. Is the cover over your controller area?

05-02-2011, 08:45 PM	#25
dino1028 Getting Wild Join Date: Mar 2009 Posts: 124	Re: Ezgo won't go I will check that and my cover is on the controller i will get back with u
dino1028 Getting Wild Join Date: Mar 2009 Posts: 124

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

05-02-2011, 09:01 PM	#26
todo_brane_ded .....He, not ME Join Date: Sep 2010 Location: Spring Hill, FL Posts: 390	Re: Ezgo won't go Apparently not all EZ's have a reed switch. Mine doesn't have one either. Mine's an '08.....

05-03-2011, 03:35 PM	#27
dino1028 Getting Wild Join Date: Mar 2009 Posts: 124	Re: Ezgo won't go Pack voltage is 36.8 4 of the batts reed 6.2 the other reed right at 6 r the ones reed 6 bad I have it fully charged
dino1028 Getting Wild Join Date: Mar 2009 Posts: 124

05-03-2011, 03:47 PM	#28
dino1028 Getting Wild Join Date: Mar 2009 Posts: 124	Re: Ezgo won't go How do u check the small post on the solenoid on the big ones if I put the red on the terminal and the negative on the - on the Batt it reeds 36.1 but I am not getting any reeding on the small post when I push the pedal
dino1028 Getting Wild Join Date: Mar 2009 Posts: 124

05-03-2011, 04:53 PM	#29
dino1028 Getting Wild Join Date: Mar 2009 Posts: 124	Re: Ezgo won't go Ok go the troubleshootin Gide says to replace solenoid but it's welded and when I jump it it still doesn't work is it bad???
dino1028 Getting Wild Join Date: Mar 2009 Posts: 124

05-03-2011, 06:50 PM	#30
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,410	Re: Ezgo won't go You jumpered the large posts on the solenoid? Not the small ones, right? key on ... cart 'in gear' ... 36+ volts.... no go? not good. when did it stop?