Allsport Lift

[joe100]

Hi! I put a 6" A arm lift on mine it was offshore made. Check the bolts w/ a micrometer they are probable metric's then check the bearing's they will be a different size. I installed grade 8 x 7/16 to take up the play in the front end and also drill a few more grease fitting's where I thought they were needed. Still working good and still tight. I wore the first installed front end within 4 months do to the loose fittings. Joe100

[scottginfla]

Originally Posted by joe100

Hi! I put a 6" A arm lift on mine it was offshore made. Check the bolts w/ a micrometer they are probable metric's then check the bearing's they will be a different size. I installed grade 8 x 7/16 to take up the play in the front end and also drill a few more grease fitting's where I thought they were needed. Still working good and still tight. I wore the first installed front end within 4 months do to the loose fittings. Joe100

Allsports lifts are not offshore made