|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
01-07-2012, 02:21 PM
|
#1 |
|
Not Yet Wild
Join Date: Jan 2012
Location: conway s.c.
Posts: 10
|
96 will not run
car ran fine before I load tested the batteries, now it will not run.I have new accelerator switch,solenoid,and have bypassed the reed switch from a previous repair, voltage is 36.3, have checked all cables/connections. the f/r switch is rotory style, no toggle switch on control box
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
01-07-2012, 02:36 PM
|
#2 | |
|
Just one day at a time
 Join Date: Sep 2009
Location: South TX
Posts: 8,650
|
Re: 96 will not run
Quote:
|
|
|
|
|
|
01-07-2012, 03:21 PM
|
#3 |
|
Not Yet Wild
Join Date: Jan 2012
Location: conway s.c.
Posts: 10
|
Re: 96 will not run
yes, and switch for gas pedal "clicks" ,if i unplug red wire off of forward side of f/r switch, the solenoid will stop working
|
|
|
|
|
01-08-2012, 03:52 PM
|
#4 |
|
Not Yet Wild
Join Date: Jan 2012
Location: conway s.c.
Posts: 10
|
Re: 96 will not run
so lost husker what do you think, I am stumped!!
|
|
|
|
|
01-08-2012, 07:08 PM
|
#5 |
|
Just one day at a time
Join Date: Sep 2009
Location: South TX
Posts: 8,650
|
Re: 96 will not run
I would go to the stickies and go through the troubleshooting guide, not sure at the moment, I am guessing that you load tested them while the rest of the cart was disconnected?
|
|
|
|
|
01-08-2012, 11:34 PM
|
#6 |
|
Not Yet Wild
Join Date: Jan 2012
Location: conway s.c.
Posts: 10
|
Re: 96 will not run
no, like an idiot they were all connected, I have gone through the dcs troubleshooting, think I have it narrowed down to the throttle sensor, I have 14.0 volts on the black wire, nothing on the white wire, thanks for any help you can give!
|
|
|
|
|
01-09-2012, 06:16 AM
|
#7 | ||
|
Just one day at a time
Join Date: Sep 2009
Location: South TX
Posts: 8,650
|
Re: 96 will not run
Quote:
Is there a toggle switch? I am confused now with comment below. Quote:
I believe we need to identify you cart clearly first, if you have and fnr by your legs with no toggle switch on controller box then you have a series cart, if there is one and the back of the fnr handle looks like a hockey puck then you have a DCS model....... You may be going through the wrong troubleshooting section. |
||
|
|
|
|
01-09-2012, 01:04 PM
|
#8 |
|
Gone Wild
Join Date: Jul 2011
Location: Houston, TX
Posts: 2,901
|
Re: 96 will not run
Glad you caught that Mark
 |
|
|
|
|
01-09-2012, 01:26 PM
|
#9 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,410
|
Re: 96 will not run
Identify your drive system.
Also please clarify the load test method and results. Age of batteries, make, & model or size? I see your battery pack is empty and you are having trouble going? Can you recharge for future testing? Then we can help.  |
|
|
|
|
01-09-2012, 07:05 PM
|
#10 |
|
Not Yet Wild
Join Date: Jan 2012
Location: conway s.c.
Posts: 10
|
Re: 96 will not run
I have a series cart, no toggle switch on controler, and f/r switch by legs, I checked the black wire at the controler with gas pedal applied just enough to activate selonoid, had 14.0 volts , then moved to white wire, had nothing, applied more accelerator pedal , still nothing, took floor mat up and pulled cover for micro switch and checked the white wire right at the sensor ( not the switch) while moving gas pedal rod through sensor, had 14.0 volts on black and nothing on white. I used the sticky for series/dcs
|
|
|
|
|
|
||||||
|
|
Linear Mode
