94 medalsit wiring issues

[Sturmruger70]

I have a 94 Medalist I am working on at my job. The cart was handed to me to fix after someone else had removed nearly every wire on it. I believe I have figured out everything except the wiring on the micro switches mounted to the F-N-R switch. My problem is that what I have does not seem to match any of the wiring diagrams I have seen here. This cart does not have a charge interlock (only two wires coming from charge receptacle). I have a blue wire coming from key switch and orange wire going to controller from MS4. The two micro switches are jumpered as is shown on most drawings. My problem is what do I do with the other end of MS2? Do I just run a hot lead to the battery since the interlock is not in place? Any help offered would be greatly appreciated.

[scottyb]

Yes, you can do that.

[Sturmruger70]

Thanks ScottyB. Ill hook it up and see what other pitfalls remain.

[pggroves]

Hope it helps.

Good luck.

[Sturmruger70]

Got this thing rewired thanks to the diagrams here. Charged it up and took it for a romp through the parking lot. Ran great till I took my foot off the throttle and found it stuck to the floor. Guess it didnt want me finished with it yet.