|
08-28-2013, 07:56 AM
|
#1 |
|
Getting Wild
Join Date: Apr 2013
Posts: 86
|
Floor flex
Is it normal to feel the floor flex when driving on an uneven slope i.e. one tire not on plane with the other 3?
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
08-28-2013, 09:44 AM
|
#2 |
|
ΜΟΛΩΝ ΛΑΒΕ
 Join Date: Nov 2012
Location: West Virginia
Posts: 4,094
|
Re: Floor flex
I have felt it on just about every CC I've driven, so I'd say yes. There's not a whole lot of suspension give on the factory setup, so something's gotta give somewhere. Too much flex will break frame pieces, however. Back in high school when we were set up to weld aluminum I would bring a cart in with the front cowl off and weld it up in shop class. Must've done that to at least 15 carts... They tend to break where the frame comes together at the front bumper brace and also on the flat support for the front cowl. On this piece, it breaks right behind the front tires down near where the piece meets the side molding. There are other places, but those I saw the most.
|
|
|
|
|
08-28-2013, 04:05 PM
|
#3 |
|
Not Yet Wild
Join Date: Jun 2013
Location: Houston, TX
Posts: 39
|
Re: Floor flex
I know mine flexes quite a bit. It is enough that I'm regretting not spending the coin for the long travel lift kit.
|
|
|
|
 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Is flex additive added to paint neccesary???? | Body and Paint | |||
| First cart paintjob...need info on flex additives! | Body and Paint | |||
| my G1 suspension flex | Lifted Golf Carts | |||
| flex muffler tubing | Big Block Talk! | |||
Linear Mode
