Club car controller install speed question?

Ironcross25 · 02-18-2017, 01:26 PM

I'll try that. I did use throttle extension. Carts rear is jacked up in that pic. Bracket is pretty upright. Fluid motion of linkage.

Sent from my iPhone using Tapatalk

Ironcross25 · 02-18-2017, 04:51 PM

First pic is pedal at rest. Second is wot.

Sent from my iPhone using Tapatalk

scottyb · 02-18-2017, 08:17 PM

What is the pack voltage reading while the cart is going 8mph at wide open throttle?
How fast did the cart go on 36v before the conversion and 48v upgrade?

Ironcross25 · 02-18-2017, 08:21 PM

I really didn't take a reading before but I know it wasn't 8. Voltage is 48-49

Sent from my iPhone using Tapatalk

Ironcross25 · 02-18-2017, 08:26 PM

Maybe it was the same. It was fall when I last drove it. The batteries would die in like 5 minutes.

Sent from my iPhone using Tapatalk

scottyb · 02-18-2017, 10:41 PM

Something still wrong. What are the common components between last fall and the 48v conversion?
And stupid question but, is there 48v between controller B+ and controller B- ?

Sergio · 02-19-2017, 08:31 AM

You may also want to unplug the "reverse" signal wire from the Controller (Blue Socket) to make sure is not active with the cart in Forward..

Ironcross25 · 02-19-2017, 12:52 PM

Sergio, boom. That was it. Unplugged it. 18mph. Still have reverse with unplugged. Do I need that or can I go without? Thanks guys

Sent from my iPhone using Tapatalk

Sergio · 02-19-2017, 04:14 PM

That controller has a lot of settings, but if all of your riders are comfortable with reverse having the same performance as forward, You can leave it as is.

The reverse tab on the controller is just an input the controller uses to reduce the speed to a user programmed value, if used, it must only be triggered when the FNR is on reverse.

02-18-2017, 01:26 PM	#11
Ironcross25 Not Yet Wild Join Date: Oct 2016 Posts: 22	Re: Club car controller install speed question? I'll try that. I did use throttle extension. Carts rear is jacked up in that pic. Bracket is pretty upright. Fluid motion of linkage. Sent from my iPhone using Tapatalk
Ironcross25 Not Yet Wild Join Date: Oct 2016 Posts: 22

02-18-2017, 04:51 PM	#12
Ironcross25 Not Yet Wild Join Date: Oct 2016 Posts: 22	Re: Club car controller install speed question? First pic is pedal at rest. Second is wot. Sent from my iPhone using Tapatalk
Ironcross25 Not Yet Wild Join Date: Oct 2016 Posts: 22

02-18-2017, 08:17 PM	#13
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,417	Re: Club car controller install speed question? What is the pack voltage reading while the cart is going 8mph at wide open throttle? How fast did the cart go on 36v before the conversion and 48v upgrade?

02-18-2017, 08:21 PM	#14
Ironcross25 Not Yet Wild Join Date: Oct 2016 Posts: 22	Re: Club car controller install speed question? I really didn't take a reading before but I know it wasn't 8. Voltage is 48-49 Sent from my iPhone using Tapatalk
Ironcross25 Not Yet Wild Join Date: Oct 2016 Posts: 22

02-18-2017, 08:26 PM	#15
Ironcross25 Not Yet Wild Join Date: Oct 2016 Posts: 22	Re: Club car controller install speed question? Maybe it was the same. It was fall when I last drove it. The batteries would die in like 5 minutes. Sent from my iPhone using Tapatalk
Ironcross25 Not Yet Wild Join Date: Oct 2016 Posts: 22

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

02-18-2017, 10:41 PM	#16
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,417	Re: Club car controller install speed question? Something still wrong. What are the common components between last fall and the 48v conversion? And stupid question but, is there 48v between controller B+ and controller B- ?

02-19-2017, 08:31 AM	#17
Sergio Gone Wild Join Date: Sep 2012 Location: Charlotte, NC Posts: 9,329	Re: Club car controller install speed question? You may also want to unplug the "reverse" signal wire from the Controller (Blue Socket) to make sure is not active with the cart in Forward..

02-19-2017, 12:52 PM	#18
Ironcross25 Not Yet Wild Join Date: Oct 2016 Posts: 22	Re: Club car controller install speed question? Sergio, boom. That was it. Unplugged it. 18mph. Still have reverse with unplugged. Do I need that or can I go without? Thanks guys Sent from my iPhone using Tapatalk
Ironcross25 Not Yet Wild Join Date: Oct 2016 Posts: 22

02-19-2017, 04:14 PM	#19
Sergio Gone Wild Join Date: Sep 2012 Location: Charlotte, NC Posts: 9,329	Re: Club car controller install speed question? That controller has a lot of settings, but if all of your riders are comfortable with reverse having the same performance as forward, You can leave it as is. The reverse tab on the controller is just an input the controller uses to reduce the speed to a user programmed value, if used, it must only be triggered when the FNR is on reverse.

Similar Threads
Thread	Forum
In middle of install. ..RXV 350 controller question	Electric EZGO
high speed gears install question	Electric EZGO
Question about Yamaha G8 speed controller	Electric Yamaha
Speed controller question	Electric Yamaha
speed controller question	Electric EZGO