|
02-20-2017, 03:25 PM
|
#1 |
|
Not Yet Wild
Join Date: Jan 2017
Location: Fl
Posts: 11
|
Voltage drain
I have 2006 CC Modle AQ0613-6123
I have replace solenoid, MCOR 6 months ago The batteries 4 months ago. when the throttle is engaged the volts drop from between 44v and 45v down to 30v an the cart won't go any more tries but the voltage keeps dropping any ideas |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
02-20-2017, 03:36 PM
|
#2 |
|
Gone Wild
 Join Date: Feb 2012
Location: Indio, CA The Desert!
Posts: 1,263
|
Re: Voltage drain
I once had a similar issue. My fix, was the cable that went from the solenoid, to the main positive battery posy was bad. I would read 50 volts, but cart wouldn't go. Then when i read the voltage after the solenoid, it was about 30. Cable end was eaten away, and would not pass the voltage.
|
|
|
|
|
02-20-2017, 03:39 PM
|
#3 |
|
Gone Wild
Join Date: Apr 2014
Location: Oregon City, Or
Posts: 1,977
|
Re: Voltage drain
If the batteries start at 45 volts, they're not getting charged. Take a look at the Sticky about charger trouble.
. |
|
|
|
 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| drain plug | Clone Engine Swaps | |||
| EZGO Rear End Click & Voltage Drain | Electric EZGO | |||
| 96 G16 Oil Drain Plug | Gas Yamaha | |||
| oil drain on 295 | Gas EZGO | |||
| Oil Drain | Gas Yamaha | |||
Linear Mode
