Club car 1980???

[Cxcman]

I acquired a new to me club car ml# A8007 09778 but it's passenger axel shaft is coming out i know it's fixable but can I get the parts to fix it or should I try and swap it for a newer one

[shadowman]

if the axle is coming out i beleive you need to take rearend cover off there should be a c-clip that holds it in..........i beleive, if not someone will know for sure...........................................

[Cxcman]

But is it a 1980 cart

[shadowman]

by the #,s you posted yes................................

[Stevegrmich]

Originally Posted by shadowman

if the axle is coming out i beleive you need to take rearend cover off there should be a c-clip that holds it in..........i beleive, if not someone will know for sure...........................................

Did they use a different method to hold axle in back then, different than the snap ring behind the axle assembly near brake drum they use today?

[shadowman]

back to 81 they used the snap ring or c-clip you had the sealed bearing behind the outer axle where studs are and the c-clip was at the other end in the rear end......i,m not certain if 80 and 81 are thesame but i can only find back to 81........i do know the axles are totally different from left side to right side but it looks like clip is the same.......................................