|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
08-13-2013, 06:07 AM | #1 |
Gone Wild
Join Date: Jan 2011
Location: mascoutah,il
Posts: 387
|
2001 pds no forward
I have a 2001 36V PDS cart that goes fine in reverse but in forward it will go about 10ft and the stop. will not go again until you cycle the key. I have replaced the solenoid and no change. Where should I start to diagnosis? Thanks
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-13-2013, 06:56 AM | #2 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: 2001 pds no forward
A PDS is a "Fly-by-Wire" system, so the controller does everything and it isn't doing it right, so the controller is bad.
If you have tall tires on cart, replace the stock controller with one that can handle the increased load. |
08-13-2013, 08:04 AM | #3 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: 2001 pds no forward
Most of the guys are using the 400 amp Alltrax DCX with good results.
|
08-13-2013, 09:53 PM | #4 |
Gone Wild
Join Date: May 2010
Location: Houston, TX
Posts: 203
|
Re: 2001 pds no forward
im soon to be one of the guys in the 400 club
|
|
|
Similar Threads | ||||
Thread | Forum | |||
2001 AA club car wont move forward | Electric Club Car | |||
96DCS Goes Forward in both reverse and Forward | Electric EZGO | |||
Alarm sounding in forward. No movement in forward or reverse | Electric Club Car | |||
ezgo 2001.5 elect. forward reverse switch | Electric EZGO | |||
Forward Reverse switch melted on forward...have question about replacement part | Electric Club Car |