No voltage from controller

devybob · 08-16-2022, 07:37 PM

Alltrex controller 42V. Checked all the pins on J-1 plug and got nothing except for J5 where I got full pack voltage (44.5). Solenoid will not click on.Where does the controller get its power from? If i know this, thats where I can start.

Volt_Ampere · 08-16-2022, 08:00 PM

Connect your laptop and run the Alltrax monitor program. It will tell you what the controller sees for all inputs.

08-16-2022, 07:37 PM	#1
devybob Gone Wild Join Date: Nov 2012 Posts: 164	No voltage from controller Alltrex controller 42V. Checked all the pins on J-1 plug and got nothing except for J5 where I got full pack voltage (44.5). Solenoid will not click on.Where does the controller get its power from? If i know this, thats where I can start.
devybob Gone Wild Join Date: Nov 2012 Posts: 164

08-16-2022, 08:00 PM	#2
Volt_Ampere Gone Wild Join Date: May 2012 Location: Rio Verde, Az Posts: 5,747	Re: No voltage from controller Connect your laptop and run the Alltrax monitor program. It will tell you what the controller sees for all inputs.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
controller fried? no B+/M- voltage	Electric EZGO
Controller voltage	Electric Yamaha
No voltage at controller	Electric Club Car
95 controller over voltage	Electric EZGO
voltage across the controller	Electric EZGO