lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric golf carts > Tomberlin


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 04-07-2022, 10:40 AM   #20
ojo
Gone Wild
 
ojo's Avatar
E-Z-GO
 
Join Date: Sep 2020
Location: Germany
Posts: 1,319
Default Re: 2008 Tomberlin Emerge hall effect senor issue

I try to explain (as far as i know): the Ezgo ITS is a 2 wire sensor. Red + green wire to the switch, black + white to the sensor. This 2 wire sensor was your old one in the Tomberlin. But there was an additional small electronic board attached.
The new style sensor you now have, is a 3 wire sensor with the electronic inside and so it's different!
The whole accelerator assembly of the Tomberlin is an Ezgo part, except the sensor. The wiring of an Ezgo will be different also.

I guess the culprit is the wiring of your sensor or microswitch, we'll see.
ojo is online now   Reply With Quote
 
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric golf carts > Tomberlin


Thread Tools
Display Modes


Similar Threads
Thread Forum
2010 emerge hall effect Tomberlin
2008 Tomberlin Emerge Power issue Tomberlin
tomberlin hall effect sensor Tomberlin
06 Tomberlin Emerge Hall Effect Sensor Tomberlin
2008 Tomberlin Emerge Battery Issue (died on the way home) Tomberlin


All times are GMT -5. The time now is 05:59 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2023, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. 2006-2017 Buggiesgonewild.com. All rights reserved.